Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access B2B
Log in to your account

Access services

Enter your reserved area

Access B2B
Log in to your account
Country|
||
PROSOFT TECHNOLOGY PLX31-MBTCP-PND
PROSOFT TECHNOLOGYNot available

Modbus® TCP/IP to PROFINET® Device Gateway - PLX31-MBTCP-PND

Product Code: PLX31-MBTCP-PND
Partner cod.: PLX31-MBTCP-PND
PROSOFT TECHNOLOGY


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Technical Specs
Description
Tecnichal data
Features and Benefits
PROFINET v2 certification with PROFINET class A compliance
Field-tested with multiple Modbus TCP/IP devices, and PROFINET controllers from multiple vendors
Remotely view and diagnose Modbus TCP/IP and PROFINET networks
Remote configuration via the free, intuitive, ProSoft Configuration Builder (PCB) software
Multiple, simultaneous Modbus TCP/IP client and/or server connections to allow for increased throughput
Technical Specs
Modbus TCP/IP Specifications
Supported Modbus Function Codes:Read Coil Status
Supported Modbus Function Codes:Read Input Status
Supported Modbus Function Codes:Read Holding Registers
Supported Modbus Function Codes:Read Input Registers
Supported Modbus Function Codes:Force (Write) Single Coil
Supported Modbus Function Codes:Preset (Write) Single Holding Register
Supported Modbus Function Codes:Force (Write) Multiple Coils
Supported Modbus Function Codes:Preset (Write) Multiple Holding Registers
Supported Modbus Function Codes:Mask Write Holding Register (server only)
Supported Modbus Function Codes:Read/Write Holding Registers (server only)
Supported clients:10
Supported servers:MBAP = 5, Encapsulated = 5
Command List:Up to 160 fully configurable client commands
Status Data:Error codes reported individually for each command
Command List Polling:Each command can be individually enabled or disabled; write-only-on-data-change is available
PROFINET Specifications
Driver Type:Class A Device
PROFINET I/O Data:1440 bytes IN, 1440 bytes OUT
Exchange Types:Cyclic Real-time (RT) and Acyclic Data
Hardware
Power Supply:24 VDC nominal
Power Supply:10 to 36 VDC allowed
Power Supply:Positive, Negative, GND Terminals
Current Load:24 VDC nominal @ 300 mA
Current Load:10 to 36 VDC @ 610 mA maximum
Operating Temperature:-25°C to 70°C (-13°F to 158°F )
Storage Temperature:-40°C to 80°C (-40°F to 176°F )
Relative Humidity:5% to 95% RH with no condensation
Shock:IEC 60068-2-27; 15G @ 11ms, 3-Axis (Operational)
Shock:IEC 60068-2-27; 30G @ 18ms, 3-Axis (Non-Operational)
Vibration:IEC 60068-2-6; 5G @ 10 to 150 Hz
Dimensions (H x W x D):5.38 x 1.99 x 4.38 in 13.67 x 5.05 x 11.13 cm
Description
The Modbus TCP/IP to PROFINET device gateway offers bi-directional data transfer between a PROFINET Controller and Modbus TCP/IP networks. The Modbus TCP/IP driver uses multiple clients and servers for faster data throughput. The PROFINET driver operates as a PROFINET device (slave). The PLX31-MBTCP-PND gateways are stand-alone DIN-rail mounted units that provide one Ethernet port for communications, remote configuration, and diagnostics. The onboard SD Card slot (SD card optional) is used for storing configuration files that can be used for recovery, transferring the configuration to another gateway, or general configuration backup.