Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access services

Enter your reserved area

ROCKWELL AUTOMATION 140G-H6F3-D12-AJ
ROCKWELL AUTOMATION 140G-H6F3-D12-AJ
ROCKWELL AUTOMATIONNot available

Molded Case Ckt-Bkr, 125A H Frame, 65 kA at 480V, T/M - Adjst Thrm / Adjst Mgntc, 3 Poles, 125A, 80 Percent MCCB, No Bus Bar Mounting, NONE, 24V AC/DC, NONE, Aux + Alarm

140G - Molded Case Circuit Breaker, H frame, 65 kA Interrupt Rating, T/M - Thermal Magnetic, 3 Poles, Rated Current 125 A, 1 No/NC AUX + Alarm, 24V
Product Code: 140G-H6F3-D12-AJ
Partner cod.: 140G-H6F3-D12-AJ
ROCKWELL AUTOMATION


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Tecnichal data
Number of poles3
Number of auxiliary contacts as change-over contact1
With integrated under voltage releaseNo
Integrated earth fault protectionNo
Complete device with protection unitYes
Rated permanent current Iu125 A
Type of control elementToggle
Rated impulse withstand voltage (Uimp)8 kV
Frame size125 A
Magnetic trip current (Im)625 to 1250 A
Thermal trip current (Ir)87 to 125 A
Voltage for reverse-fed circuit breaker, max480V AC per UL/CSA
Watt lossThermal magnetic type: 34.2 W
Insulation voltage (Ui)Rated 1000V per IEC
Thermal trip rating, max125 A @ ambient temperature 40 °C
Electrical life cycle8000 @ 415V AC
Interrupting rating65 kA @ 480V AC, 50/60 Hz per NEMA, UL, CSA
Rated ultimate short-circuit breaking capacity (Icu)IEC 60947-2: 70 kA @ 500V DC, 3-poles in series, thermal-magnetic trip unit only
Rated service short-circuit breaking capacity (Ics)IEC 60947-2: 100% lcu @ 500V DC, 3-poles in series, thermal-magnetic trip unit only
Protection typeT/M-adjustable thermal/adjustable magnetic TMA
Motor drive integratedNo
With switched-off indicatorNo
Motor drive optionalYes
Position of connection for main current circuitFront side
Type of electrical connection of main circuitScrew connection
Suitable for DIN rail (top hat rail) mountingNo
DIN rail (top hat rail) mounting optionalYes
Degree of protection (IP)IP40
Weight2.65 lb
Mechanical life operations25000 /h
Vibration2...13.2 Hz ±1 mm, 13.2...100 Hz ±0.7 G
ShockPeak acceleration: 150 m/s^2 peak, pulse duration 11 ms
Factory option1 NO/NC auxiliary + 1 alarm 24V AC/DC
Height130 mm
Device constructionBuilt-in device fixed built-in technique
Width90 mm
Depth82.5 mm
Storage temperature-40 °F
Wire temperature ratingCu 75 °C
Operational voltage (Ue)90% of voltage rating @ 3000 meter (9840 ft) altitude
Rated uninterrupted current (Iu)98% of current rating @ 3000 meter (9840 ft) altitude
Ambient temperature without derating104 °F