140M-C2T-B63 ROCKWELL AUTOMATION

With integrated auxiliary switch	No
With integrated under voltage release	No
Rated short-circuit breaking capacity lcu at 400 V, AC	100 kA
Rated operation power at AC-3, 400 V	2.2 kW
Rated permanent current Iu	6.3 A
Rated operation power at AC-3, 230 V	1.5 kW
Rated operating voltage	230 A
Type of control element	Turn button
Overload release current setting	4 A
Type of electrical connection of main circuit	Screw connection
Magnetic release current per IEC	130 A
Rated operational current (Ie) per IEC	6.3 A
Magnetic trip current	130 A
Rated supply current (Ie)	0.1 A
Short circuit current (Icu) for group motor installation, max	65 kA @ 480V
Current range	4 to 6.3 A
Ultimate short circuit breaking capacity (Icu) per IEC	4 kA @ 690V
Rated service short circuit breaking capacity (Ics) per IEC	4 kA @ 690V
Hp rating, max	5 Hp @ 575V, 3-phase
Rated insulation voltage (Ui)	690V per IEC, SEV, VDE0660
Electrical life cycle	100000 operations (Ie maximum)
Switching of standard motors per IEC	4.0 kW @ 690V (AC-3), 3-phase
KW rating, max	4 kW @ 690V (AC-3), 3-phase
Back up fuse (gG, gL) current rating (if Icc Ã¢¥ Icu ) per IEC	No back-up fuse required @ 500V
Short circuit current (Type 2 coordination), max	50 kA @ 480V
Total power loss (Pv) for circuit breaker	6...11.5 W @ rated load operating temperature
Rated thermal current (Ith)	0.1...32 A @ 60 °C ambient temperature
Short circuit current for tap conductor protection, max	65 kA @ 480Y/277V per UL 508-manual motor controller
Short circuit current for combination motor controller, max	65 kA @ 480V/277V per UL 508-self-protected (Type E)
Fuse or circuit breaker per NEC, max	450 A, UL 508-manual motor controller
Rated impulse withstand voltage (Uimp)	Main circuits/overvoltage category: 6 kV/III
Short circuit current for group motor installation, max	65 kA @ 480V, UL 508-manual motor controller
Short circuit current for motor disconnect, max	65 kA @ 480V, UL 508-manual motor controller
Magnetic release current	Fixed setting 16...21 x Ie max. Ie max. = maximum values of setting ranges (±20 %)
Number of poles	3
With thermal protection	Yes
Phase failure sensitive	Yes
Switch off technique	Thermomagnetic
Switching frequency, max	25 ops/h
Trip class	10
Rated frequency	50/60 Hz
Phase loss protection	Differential release
Width	45 mm
Depth	70 mm
Height	90 mm
Frame size	Frame size C, 32 A
Contactor size (Type 2 coordination), min	100-C30 @ 600V
Device construction	Built-in device fixed built-in technique
Degree of protection (IP)	IP2X
Weight	315 lb
Mechanical life operations	100000 /h
Breaking capacity	Standard breaking capacity
Shock	Transport (60068-2-27): 30 G, 11 ms, all axes
Protection type	Adjustable thermal/fixed magnetic (fixed at 16...20 x In)
Factory option	No circuit-breaker auxiliary or trip contacts
Vibration	Operation (60068-2-6): 5 G
Ambient storage temperature	-40 °C
Ambient operating temperature	-25 °C
Site altitude	2000 m (NN)
Moisture heat	40 °C, relative humidity 93 %, 56 days, (60068-2-3)
Dry heat	100 °C, relative humidity < 50 %, 7 days, (60086-2-2)
Dependence on temperature	No current reduction @ 60 °C
Moisture change climate	23 °C/83 % relative humidity and 40 °C/92 % relative humidity, 56 cycles, (600068-2-30)
Pollution degree	3
Ambient temperature compensation, max	-20 °C
Utilization category	Motor starter: AC-3 (IEC60947-4-1)
Overload protection characteristics	IEC 60947-4-1 motor protection