140M-D8T-C20 ROCKWELL AUTOMATION

With integrated auxiliary switch	No
With integrated under voltage release	No
Rated short-circuit breaking capacity lcu at 400 V, AC	65 kA
Rated operation power at AC-3, 400 V	10 kW
Rated permanent current Iu	20 A
Rated operation power at AC-3, 230 V	5.5 kW
Rated operating voltage	230 A
Type of control element	Turn button
Overload release current setting	14.5 A
Type of electrical connection of main circuit	Screw connection
Magnetic trip current	325 A
Rated supply current (Ie)	1.6 A
Total power loss (Pv) for circuit breaker at rated load operating temperature	6 W
Short circuit current (Icu) for group motor, max	30 kA @ 480V
Rated operational current (Ie)	20 A per IEC
Current range	14.5 to 20 A
Hp rating, max	7.5 Hp @ 230V, 3-phase
Ultimate short circuit breaking capacity (Icu)	65 kA @ 400/415V per IEC
Electrical life cycle	100000 operations
Insulation voltage	Rated 690V per IEC, SEV, VDE0660
Back up fuse (gG, gL) current rating (if Icc Ã¢¥ Icu )	No back-up fuse required per IEC
KW rating, max	17 kW @ 690V, 3-phase, AC-3
Switching of standard motors	5.5 kW @ 230/240V (AC-3), 3-phase per IEC
Rated thermal current (Ith)	1.6...32 A @ up to 60 °C ambient temperature
Short circuit current, max	65 kA @ 480V, Type 2 coordination
Short circuit current for tap conductor protection, max	30 kA @ 480Y/277V per UL 508-manual motor controller
Short circuit current for combination motor controller, max	30 kA @ 480Y/277V per UL 508-self-protected (Type E)
Rated service short-circuit breaking capacity (Ics)	4 kA @ 690V per IEC
Short circuit current for group motor installation, max	30 kA @ 600V, UL 508Ã¢manual motor controller
Short circuit current for motor disconnect, max	30 kA @ 600V, UL 508Ã¢manual motor controller
Magnetic release current	325 A per IEC
Number of poles	3
With thermal protection	Yes
Phase failure sensitive	Yes
Switch off technique	Thermomagnetic
Switching frequency, max	25 ops/h
Overload trip class	10
Rated impulse withstand voltage (Uimp) for main circuits/overvoltage category	6kV/III
Rated impulse withstand voltage (Uimp) for auxiliary circuits/overvoltage category	6kV/III
Rated frequency	50/60 Hz
Phase loss protection	Differential release
Fuse or circuit breaker, max	450 A per NEC, UL 508-manual motor controller
Width	45 mm
Depth	80 mm
Height	90 mm
Frame size	Frame size D, 32 A
Contactor size, min	100-C30 @ 600V, Type 2 coordination
Device construction	Built-in device fixed built-in technique
Degree of protection (IP)	IP2X
Weight	365 lb
Mechanical life operations	100000 /h
Breaking capacity	High breaking capacity
Protection type	Adjustable thermal/fixed magnetic (fixed at 16...20 x In)
Factory option	No circuit-breaker auxiliary or trip contacts
Vibration resistance	Operation (60068-2-6): 5 G
Shock resistance	Transport (60068-2-27): 30 G, 11 ms, all axes
Ambient storage temperature	-40 °C
Ambient operating temperature	-25 °C
Ambient temperature compensation	-20 °C
Altitude	2000 m (NN)
Magnetic release current (±20 %)	Fixed setting 16...21 x Ie maximum (Ie maximum = maximum values of setting ranges)
Pollution degree	3
Dependence on temperature @ 40 °C	No current reduction
Dependence on temperature @ 50 °C	No current reduction
Dependence on temperature @ 60 °C	No current reduction
Moisture heat (60068-2-3)	40 °C, relative humidity 93 %, 56 days
Dry heat (60086-2-2)	100 °C, relative humidity < 50 %, 7 days
Dependence on temperature @ 70 °C	15% current reduction of the upper rated current Ie @ 70 °C (158 °F)
Moisture change climate (600068-2-30)	23 °C/83 % relative humidity and 40 °C/92 % relative humidity, 56 cycles
Utilization category	Motor starter: AC-3 (IEC60947-4-1)
Overload protection characteristics	IEC 60947-4-1 motor protection