Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access services

Enter your reserved area

ROCKWELL AUTOMATION 194E-E25-1753
ROCKWELL AUTOMATIONAvailable

194E Load switch, 25 A, 3 Poles, OFF-ON 90°, Open, Front/Door, Standard Terminals, Select actuator separately, Open Switch Style, OFF-ON 90°

IEC Load Switch, Open - Front / Door, OFF-ON 90°, 25A, 3 Poles
Product Code: 194E-E25-1753
Partner cod.: 194E-E25-1753
ROCKWELL AUTOMATION


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Technical Specs
Description
Tecnichal data
Number of auxiliary contacts as normally open contact0
Number of auxiliary contacts as normally closed contact0
Conditioned rated short-circuit current Iq20 kA
Rated permanent current Iu25 A
Rated operation power at AC-23, 400 V11 kW
Max. rated operation voltage Ue AC690 V
Rated operation power at AC-3, 400 V7.5 kW
Rated short-time withstand current lcw900 kA
Rated frequency60 Hz
Switch size25 A
Lost power per pole1 W
Conventional free air thermal current (Ith)40 A per IEC
Conventional enclosed thermal current (Ie)32 A per IEC
Rated operational voltage (Ue)690V per IEC
Rated isolation voltage (Ui)690V per IEC
Continuous currentUL/CSA (applications): 25 A
Rated breaking capacityAC-23A (cosφ 0.45): 296 A @ 230V
Motor FLA ratingUL/CSA application: 8.5 A @ 480V, 60 Hz, 1 pole, 1 phase
Hp motor ratingUL/CSA application: 5 Hp @ 600V, 60 Hz, 1 pole, 1 phase
Fuse rating of circuit (type g, G), maxShort circuit current (co-ordination type 2): 25 A @ 400/415V
Rated current (Ie)DC-21A (for resistive loads): 5 A @ 220V, 2 pole in series, T ≤1 ms, Ue max = 660V
Rated power (Pe)AC-3: 7.5 kW @ 690V
Number of switches1
Motor drive integratedNo
Voltage release optionalNo
Type of electrical connection of main circuitScrew connection
Switching rate120 ops/h
Rated impulse voltage (Uimp)8 kV per UL, CSA
Test voltage (Ui)2.5 kV for 1 minute
Heavy pilot dutyUL/CSA (applications): A600, AC
Version as emergency stop installationNo
Degree of protection (NEMA)Other
Tightening torque1.4 Nm (12.2 lb-in)
Switch configurationOFF-ON 90°
Rigid wire gauge1.5...16 mm2 (14...8 AWG)
Fine strands wire gauge1.5...10 mm2 (14...8 AWG)
KnockoutsPG-type cable gland entry
Wire gauge, maxTerminal size per IEC 947-1: A6
Protection class according to IEC 529Switch bodies: IP20 @ motor rating 60 Hz
Actuator typeSelect actuator separately
Version as reversing switchNo
Version as main switchYes
Version as maintenance-/service switchYes
Degree of protection (IP), front sideIP20
Mechanical life operations200000
Suitable for front mounting 4-holeYes
Suitable for front mounting centreYes
Device constructionBuilt-in device fixed built-in technique
Switch body height, approx64 mm (2-33/64 inch) @ 25 A
Switch body depth, approx60 mm (2-3/8 inch) @ 25 A
Switch body width, approx45 mm (1-25/32 inch) @ 25 A
InstallationOpen-front/door
Suitable for distribution board installationNo
Ambient enclosed temperature-20 °C
Ambient storage temperature-40 °C
Ambient operation temperature-25 °C
Technical Specs
Specifications
Mounting:Front / Door
Number Of Poles:3 Poles
Type:OFF-ON 90
Actuator:Select actuator separately
Switch Data
Size:25 A
Enclosure Type:Open
Installation:Front / Door
Pole Configuration:3 Poles
Configuration:OFF-ON 90
Actuator Data
Actuator Selection:Select actuator separately
Description
194E Load switch, 25 A, 3 Poles, OFF-ON 90°, Open, Front/Door, Standard Terminals, Select actuator separately, Open Switch Style, OFF-ON 90°