Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access services

Enter your reserved area

ROCKWELL AUTOMATION 194L-E25-1752
ROCKWELL AUTOMATION 194L-E25-1752
ROCKWELL AUTOMATION 194L-E25-1752
ROCKWELL AUTOMATION 194L-E25-1752
ROCKWELL AUTOMATIONAvailable

194L Load Switch, 25 A, 2 Poles, OFF-ON 90°, Open, Front/Door, Select actuator separately

IEC Control and Load Switch, OFF-ON 90°, 25 Amp, 2 Poles , Front / Door
Product Code: 194L-E25-1752
Partner cod.: 194L-E25-1752
ROCKWELL AUTOMATION


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Technical Specs
Tecnichal data
Number of poles2
Rated permanent current Iu25 A
ModelOn/Off switch
Rated impulse voltage (Uimp)6 kV
Switch size25 A
Power lost0.9 W
Fuse size, max80 A per UL/CSA
Rated voltage (Ue)690V per IEC-947
Rated thermal current (Ith)30 A @ 40 °C per IEC-947
Rated thermal current (Ithe)25 A @ 60 °C per IEC-947
Conditional rated short circuit current5 kA (gL characteristic)
Rated breaking capacity176 A @ 380V, 0.45 [cos j]
Back-up fuse, max80 A (gG characteristic) per UL/CSA
Rated short-time current0.75 kArms for 1 s (gL characteristic)
Strongest series fuse25 A (not in enclosure, gL characteristic)
Standard motor DOL rating3-poles, 3-phase: 19.2 A @ 120V (similar to AC-3) per UL (CSA)
Rated making/breaking capacity (= 4 x Ie)6 contacts in series: 58.2 A @ 115.5V (DC-23A, DC-3, DC-5 for inductive loads, T ≤7.5 ms)
Rated making/breaking capacity (= 1.5 x Ie)8 contacts in series: 33 A @ 201.6V (1.05 x rated voltage), DC-21A (for resistive loads, T = 1 ms), Ue max = 600V
Ampere rating25 A (suitable for switching off-load (AC-20) above 660V, but only upto 660V for switches with screws at the rear)
Rated making/breaking capacity (= 1.1 x Ie)8 contacts in series: 8.8 A @ 231V (1.1 x rated voltage), DC-21A (for inductive loads, T = 50 ms), Ue max = 600V
Rated power (Pe)6 contacts in series: 1.60 kW @ 110V (DC-23A, DC-3, DC-5 for inductive loads, T ≤1 ms)
Rated current (Ie)8 contacts in series: 8 A @ 240V, DC-21A (for inductive loads, T = 50 ms)
Type of electrical connection of main circuitScrew connection
Electrical switch rate120 ops/h
Short circuit prospective fault current, max5 kA per UL/CSA
Electrical switching rate120 ops/h per UL/CSA
With zero (off) positionYes
Protection classSwitch bodies: IP20 (IEC 529)
Gland entry typePG-type cable gland entry
Rigid wire gauge, max(2) 16...10 AWG (1.5...6 mm^2)
Fine strands wire gauge, max(2) 16...10 AWG (1.5...6 mm^2)
Actuator typeSelect actuator separately
Switch configurationOFF-ON 90°
With retraction in 0-positionNo
Suitable for distribution board installationNo
Suitable for intermediate mountingNo
Complete device in housingNo
Degree of protection (IP), front sideIP66
Mechanical switching rate1200 ops/h
Mechanical life operationsEndurance: 1000000
InstallationOpen-front/door
Suitable for front mountingYes
Material housingPlastic
Operating temperature-25 °C
Storage temperature-40 °C
Technical Specs
Specifications
Number Of Poles:2 Poles
Actuator:Select actuator separately
Switch Data
Enclosure Type:Open
Configuration:OFF-ON 90°
Size:25 A
No. of Poles:2 Poles
Installation:Front / Door
Actuator
Actuator Selection:Select actuator separately