Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access B2B
Log in to your account

Access services

Enter your reserved area

Access B2B
Log in to your account
Country|
||
ROCKWELL AUTOMATION 42EF-G1MPA-F4
ROCKWELL AUTOMATIONNot available

RightSight Photosensor, 18 mm Cylindrical, Front Through Hole, Fiber Optic Large Aperture, Infrared, Depends on the fiber optic, Manually Adjustable, PNP, DC Complementary LO/DO, 4 Pin Micro QD on Pigtail

PHOTOSWITCH Photoelectric Sensor, RightSight, Infrared Glass Fiber Optic, Infred, DC - 2 Complementary LO/DO Outputs, Source (PNP), 4-pin DC Micro QD on 152mm (6in) pigtail
Product Code: 42EF-G1MPA-F4
Partner cod.: 42EF-G1MPA-F4
ROCKWELL AUTOMATION


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Tecnichal data
Degree of protection (IP)IP67
Sensing mode typeFiber optic large aperture
Sensing distanceDepends on fiber optic
List of degrees of protection (IP)IP67 (IEC 529), 1200 psi (8270 kPa) washdown
AWG-number22
Setting procedureManual adjustment
List of degrees of protection (NEMA)6P, 4X
Vibration10...55 Hz, 1 mm amplitude, meets or exceeds IEC 60947-5-2
Shock30 G with 1 ms pulse duration, meets or exceeds IEC 60947-5-2
Voltage typeDC
Material housingOther
Rated control supply voltage at DC10.8 V
Type of switching outputPNP
Type of lightInfrared light
Type of electric connectionConnector M12
Light sourceInfrared
Sensitivity adjustmentSingle-turn knob
Load current100 mA
Connection type4 pin micro QD on pigtail
Protection typeShort circuit, reverse polarity, false pulse, overload
LED statusYellow (for DC models, output and margin LEDs alternate flashing when SCP is active), OFF: output de-energized, label: output de-energized, ON: output energized, label: output energized, Flashing: short circuit protection (SCP) active
IndicationLED
Max. output current100 mA
Current consumption35 mA DC max, 15 mA AC max
Response timeDepends on fiber optic cable
Leakage currentDC: 0.1 mA, max, AC: 0.4 mA, max
Housing materialMindel™
Material of cable sheathPolyvinyl chloride (PVC)
Cover materialUdel™
Lens materialAcrylic
Relative humidity5...95% (noncondensing)
Ambient light immunityIncandescent light 5000 lux
Operating temperature-25...70 °C (-13...158 °F) 132V @ AC/DC