Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access B2B
Log in to your account

Access services

Enter your reserved area

Access B2B
Log in to your account
Country|
||
ROCKWELL AUTOMATION 871TM-DH10NE30-H2
ROCKWELL AUTOMATIONNot available

Inductive Sensor, Metal Face, Short Barrel, 30 mm Barrel Diameter, DC, 10 mm Sensing Distance, Normally Open DC, 2 M 18 AWG ToughLink

Proximity Sensor, 2-Wire DC, 30mm Diameter, Shielded, Tubular:Stainless Steel, Metal Face, 10mm Sensing Distance, N.O., Sink (NPN) or Source (PNP) Programmable, ToughLink Cable
Product Code: 871TM-DH10NE30-H2
Partner cod.: 871TM-DH10NE30-H2
ROCKWELL AUTOMATION


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Tecnichal data
Diameter sensor30 mm
Nominal sensing distance10 mm
Degree of protection (NEMA)13
Shock30 G (1.06 oz), 11 ms
Vibration55 Hz, 1 mm amplitude, 3 planes
Enclosure type ratingNEMA 1, 2, 3, 3R, 4, 4X, 6, 6P, 12, IP67 (IEC529) all models, 1200 psi washdown, toughlink and micro connector versions are also rated IP69K (IEC 529)
Voltage typeDC
Type of electric connectionCable
Connection typeToughlink #18 AWG 2 m
Connection styleCable: 2 m length, A2 - 3-conductor PVC, C2 - 3-conductor #22 AWG-toughlink, H2 - 3-conductor #18 AWG toughlink, Quick disconnect: 4 pin mini style, 4 pin micro style
Material housingMetal
Type of actuationMetallic Target
Housing materialStainless steel face and barrel
Switching frequency40 Hz
Load current≤200 mA
Hysteresis10% typical
Leakage current≤0.9 mA
Voltage drop≤8V
Special featureShort barrel
Output configurationNormally open DC
Repeatability≤10% at constant temperature
Correction factorSteel: 1
Status indicatorRed: Output energized, Green: Power/short circuit (flashing)-18 mm models only
Protection typeFalse pulse, transient noise, reverse polarity, short circuit (trigger at 340 mA typical), overload
Capacitive load≤1 μF
Product typeMetal face
OutputNormally open
DescriptionMetal face inductive sensor
Operating temperature-25 °C