Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access services

Enter your reserved area

ROCKWELL AUTOMATION 871TM-DR8NE18-A2
ROCKWELL AUTOMATION 871TM-DR8NE18-A2
ROCKWELL AUTOMATION 871TM-DR8NE18-A2
ROCKWELL AUTOMATIONNot available

Metal Face Inductive Sensor

Product Code: 871TM-DR8NE18-A2
Partner cod.: 871TM-DR8NE18-A2
ROCKWELL AUTOMATION


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Download
Tecnichal data
Diameter sensor18 mm
Nominal sensing distance8 mm
Degree of protection (NEMA)13
Shock30 G (1.06 oz), 11 ms
Vibration55 Hz, 1 mm amplitude, 3 planes
Enclosure type ratingNEMA 1, 2, 3, 3R, 4, 4X, 6, 6P, 12, IP67 (IEC529) all models, 1200 psi washdown, toughlink and micro connector versions are also rated IP69K (IEC 529)
Voltage typeDC
Type of electric connectionCable
Connection typePVC cable 2 m
Connection styleCable: 2 m length, A2 - 3-conductor PVC, C2 - 3-conductor #22 AWG-toughlink, H2 - 3-conductor #18 AWG toughlink, Quick disconnect: 4 pin mini style, 4 pin micro style
Material housingMetal
Type of actuationMetallic Target
Housing materialStainless steel face and barrel
Switching frequency60 Hz
Load current≤25 mA
Hysteresis10% typical
Leakage currentt ≤1 mA
Voltage drop≤8V DC
Special featureIntrinsically safe
Output configurationNormally open DC
Repeatability10% typical
Correction factorSteel: 1
Status indicatorRed: Output energized
Protection typeFalse pulse, transient noise, reverse polarity, short circuit and overload
Capacitive load≤1 μF
Product typeMetal face
OutputNormally open
DescriptionMetal face inductive sensor
Operating temperature-25 °C