Catalogo Prodotti - Technology Bsa

2 N.O. - 2 N.C. Auxiliary Contact Block for Front Mounting. Use with 100-E09..100-E96, 700-EF220, 300 NEMA 00..3 Contactors

Feed-through terminal block, nom. voltage: 1000 V, nominal current: 57 A, number of connections: 2, connection method: Spring-cage connection, Rated cross section: 10 mm², cross section: 0.2 mm²-16 mm², mounting type: NS 35/7,5, NS35/15, color: gray

Sensor/actuator cable, 3-position, free cable end, on Valve connector C (8mm), with 1 LED, connected with Z diode, cable length: 1.5 m

700HC700HV 2 Pole Relay Retainer Clip - 700-Hn114

IEC Control and Load Switch, Changeover 1-0-2 45°, 16 Amp, 4 Poles, Available as Custom Order , Front / Door

Side Mounted Auxiliary Contact, 1 NO 1 NC, 9 mm Wide, For 140MT, Mtr Protection Ckt-Br

Integrated LED, Plastic Latch Mount, 24V AC/DC, White LED, 1 N.O. Contact(s), 0 N.C. Contact(s), Standard

Kinetix 5700 Shared-bus T-connector kit

440R Single Function Safety Relays, N/A,2 N.O., , 24V DC , Fixed,Automatic/Manual Reset

MPCB, Standard Magnetic Trip (Fixed at 13 x le), 18 - 25 A, Std. Performance, Frame Size C

PHOTOSWITCH Photoelectric Sensor, RightSight, Transmitted Beam Receiver, Red, DC - 2 Complementary LO/DO Outputs, Source (PNP), 5M (16.4 Ft) Cable, IO-Link Enabled

IEC Load Switch, IP65 (Thermoplastic) - Base / DIN Rail, OFF-ON 90°, 32A, 3 Poles, Supplied with a Type N Red/Yellow Actuator

MCS 100-K, 104-K, 700-K Accessories, Power Wiring Kit

Bulletin 1489-M Thermal-magnetic Circuit Breakers, Standard configuration, AC, 1 Pole Configuration, Trip Curve C, UL/CSA Max. Voltage: 277V AC, 48V DC ; IEC/EN Max. Voltage: 230V AC,3A

440R Single Function Safety Relays, Dual Channel N/A,2 N.O., , 24V DC , Fixed,Automatic/Manual Reset

Device connector front mounting, 4-position, Socket, straight, M8, Front mounting, M8 x 0.5, Individual wires, cable length: 0.5 m, 0.25 mm², PVC litz wire

100-C IEC Contactor, Screw Terminals, Line Side, 9A, 0 N.O. 1 N.C. Auxiliary Contact Configuration, Single Pack

855T 70mm Control Tower Light Accessories, 24 Volt Incandescent Lamp (AC/DC)

PCB connector, nominal cross section: 2.5 mm², color: green, nominal current: 12 A, rated voltage (III/2): 320 V, contact surface: Tin, contact connection type: Socket, number of potentials: 5, number of rows: 1, number of positions: 5, number of connections: 5, product range: MSTB 2,5/..-STF, pitch: 5.08 mm, connection method: Screw connection with tension sleeve, screw head form: L Slotted, conductor/PCB connection direction: 0 °, locking clip: - without locking clip, plug-in system: COMBICON MSTB 2,5, locking: Screw locking mechanism, mounting: Screw flange, type of packaging: packed in cardboard

PCB terminal block, nominal current: 8 A, rated voltage (III/2): 400 V, nominal cross section: 1.5 mm², number of potentials: 6, number of rows: 1, number of positions per row: 6, product range: PTSA 1,5, pitch: 3.5 mm, connection method: Push-in spring connection, mounting: Wave soldering, conductor/PCB connection direction: 45 °, color: green, Pin layout: Zigzag pinning W, Solder pin [P]: 3.5 mm, number of solder pins per potential: 1, type of packaging: packed in cardboard. Offset soldering legs, two-rowed