Automazione Industriale
IS 208MM/4NC-2E0
Inductive switch
Cod. Articolo: 50113211 ![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
Cod. Fornitore: 50113211 ![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
LEUZE
Basic data | Series: 208 Typ. operating range limit Sn: 2 mm Operating range Sa: 0 ... 1.6 mm |
Electrical data | Protective circuit: Inductive protection Polarity reversal protection Short circuit protected Performance data Supply voltage UB: 10 ... 30 V, DC Residual ripple: 0 ... 20 %, From UB Open-circuit current: 0 ... 10 mA Temperature drift, max. (in % of Sr): 10 %, Over the entire operating temperature range Repeatability, max. (in % of Sr): 5 %, For UB = 20 … 30 V DC, ambient temperature Ta = 23 °C ± 5 °C Switching hysteresis: 10 % Outputs Number of digital switching outputs: 1 Piece(s) Switching outputs: Array Switching output 1: Array |
Time behavior | Switching frequency: 5,000 Hz Readiness delay: 32 ms |
Connection | Number of connections: 1 Piece(s) Connection 1 Function: Signal OUT Voltage supply Type of connection: Cable Cable length: 2,000 mm Sheathing material: PVC Cable color: Gray Number of conductors: 3 -wire Wire cross section: 0.14 mm² |
Mechanical data | Design: Cylindrical Thread size: M8 x 1 mm Dimension (∅ x L): 8 mm x 35 mm Type of installation: Embedded Housing material: Stainless steel Stainless steel housing: V2A Sensing face material: Plastic, Polyamide (PA 12) Net weight: 41.5 g Housing color: Red, RAL 3000 Silver Type of fastening: Mounting thread Via optional mounting device Standard measuring plate: 8 x 8 mm², Fe360 |
Operation and display | Type of display: LED Number of LEDs: 1 Piece(s) |
Environmental data | Ambient temperature, operation: -25 ... 70 °C Ambient temperature, storage: -25 ... 70 °C |
Certifications | Degree of protection: IP 67 Protection class: III Certifications: c UL US Test procedure for EMC in accordance with standard: IEC 61000-4-2 IEC 61000-4-3 IEC 61000-4-4 Standards applied: IEC 60947-5-2 |
Correction factors | Aluminum: 0.3 Stainless steel: 0.7 Copper: 0.3 Brass: 0.45 Fe360 steel: 1 |
Di seguito alcuni articoli correlati a quello che stai vedendo