1016272 PHOENIX CONTACT - Technology Bsa

CDDC 2,5/16-PV-5,0 - Direct connector

PCB direct plug, nominal cross section: 2.5 mm², color: green, nominal current: 12 A, rated voltage (III/2): 320 V, contact surface: Tin, number of potentials: 32, number of rows: 2, number of positions: 16, number of connections: 32, product range: CDDC 2,5/..-PV, pitch: 5 mm, connection method: Crimp connection, mounting: SKEDD - Direct plug-in technology, conductor/PCB connection direction: 90 °, plug-in system: SKEDD, locking: Snap-in locking, mounting: Self-locking flange, type of packaging: packed in cardboard

Cod. Articolo: 1016272

Cod. Fornitore: 1016272

PHOENIX CONTACT

Product properties	Product line: COMBICON Connectors M Product type: PCB direct plug Product family: CDDC 2,5/..-PV Number of positions: 16 Pitch: 5 mm Number of connections: 32 Number of rows: 2 Mounting flange: Self-locking flange Number of potentials: 32
Electrical properties	Nominal current I_N: 12 A Nominal voltage U_N: 320 V Degree of pollution: 3 Contact resistance: 1.4 mÃ© Rated voltage (III/3): 250 V Rated surge voltage (III/3): 4 kV Rated voltage (III/2): 320 V Rated surge voltage (III/2): 4 kV Rated voltage (II/2): 630 V Rated surge voltage (II/2): 4 kV
Connection data	Connection technology Connector system: SKEDD Nominal cross section: 2.5 mm² Interlock Locking type: Snap-in locking Mounting flange: Self-locking flange Conductor connection Connection method: Crimp connection Connection direction of the conductor to plug-in direction: 0 ° Conductor cross section flexible: 0.14 mm² ... 2.5 mm² Conductor cross section AWG: 26 ... 14
Mounting	Mounting type: SKEDD - Direct plug-in technology Connection method: Crimp connection
Material specifications	Material data - housing Color (Housing): green (6021) Insulating material: PA Insulating material group: I CTI according to IEC 60112: 600 Flammability rating according to UL 94: V0 Glow wire flammability index GWFI according to EN60695-2-12: 850 Glow wire ignition temperature GWIT according to EN60695-2-13: 775 Temperature for the ball pressure test according to EN60695-10-2: 125 °C Material data Ã¢ actuating element Insulating material: PA Insulating material group: I CTI according to IEC 60112: 600 Flammability rating according to UL 94: V0 Glow wire flammability index GWFI according to EN60695-2-12: 850 Glow wire ignition temperature GWIT according to EN60695-2-13: 775 Temperature for the ball pressure test according to EN60695-10-2: 125 °C
Notes	Note on the contact: The information on the basic material and the finish properties of the crimp contacts is to be found in the E-Shop in the technical data for the respective crimp contact. Note on application: All laboratory tests are performed in combination with the crimp contacts specified as accessories. The current depends on the crimp contact and conductor cross section used. The corresponding crimp contacts are to be found in the "Accessories" tab. The crimp contacts may only be processed with approved crimping tools.
Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/a4d29c3ce6332549b7d9096aad123eaf/-S204x204-FJPG Pitch: 5 mm Width [w]: 85.8 mm Height [h]: 19.6 mm Length [l]: 13 mm Installed height: 16 mm PCB design Pin spacing: 7.00 mm
Mechanical tests	Tensile strength of crimp connections Result: Test passed Conductor cross section/conductor type/tractive force setpoint/actual value: 0.14 mm² / flexible / > 18 N Insertion and withdrawal forces Result: Test passed No. of cycles: 25 Insertion strength per pos. approx.: 4 N Withdraw strength per pos. approx.: 3 N Contact holder in insert Specification: IEC60512-15-1:2008-05 Contact holder in insert Requirements >20 N: Test passed Resistance of inscriptions Specification: IEC60068-2-70:1995-12 Result: Test passed Polarization and coding Specification: IEC60512-13-5:2006-02 Result: Test passed Visual inspection Specification: IEC60512-1-1:2002-02 Result: Test passed Dimension check Specification: IEC60512-1-2:2002-02 Result: Test passed
Electrical tests	Thermal test \| Test group C Specification: IEC60512-5-1:2002-02 Tested number of positions: 16 Insulation resistance Specification: IEC60512-3-1:2002-02 Insulation resistance, neighboring positions: >5MÃ© Air clearances and creepage distances \| Specification: IEC60664-1:2007-04 Insulating material group: I Comparative tracking index (IEC60112): CTI 600 Rated insulation voltage (III/3): 250 V Rated surge voltage (III/3): 4 kV minimum clearance value - non-homogenous field (III/3): 3 mm minimum creepage distance (III/3): 3.2 mm Rated insulation voltage (III/2): 320 V Rated surge voltage (III/2): 4 kV minimum clearance value - non-homogenous field (III/2): 3 mm minimum creepage distance (III/2): 3 mm Rated insulation voltage (II/2): 630 V Rated surge voltage (II/2): 4 kV minimum clearance value - non-homogenous field (II/2): 3 mm minimum creepage distance (II/2): 3.2 mm
Environmental and real-life conditions	Vibration test Specification: IEC60068-2-6:2007-12 Frequency: 10 - 150 - 10 Hz Sweep speed: 1octave/min 50m/s² (60.1Hz...150Hz) Amplitude: 0.35mm (10Hz...60.1Hz) Test duration per axis: 2.5 h Durability test Specification: IEC60512-9-1:2010-03 Impulse withstand voltage at sea level: 4.8 kV Contact resistance R₁: 1.4 mÃ© Contact resistance R₂: 1.4 mÃ© Insertion/withdrawal cycles: 25 Insulation resistance, neighboring positions: >5MÃ© Climatic test Specification: ISO6988:1985-02 Corrosive stress: 0.2 dm³SO₂on 300 dm³/40 °C/1 cycle Thermal stress: 105°C/168h Power-frequency withstand voltage: 2.21 kV Shocks Specification: IEC60068-2-27:2008-02 Pulse shape: Semi-sinusoidal Acceleration: 300m/s² Shock duration: 18ms Test directions: X-, Y- and Z-axis (pos. and neg.) Ambient conditions Ambient temperature (operation): -55 °C ... 105 °C (dependent on the derating curve) Ambient temperature (storage/transport): -40 °C ... 70 °C Relative humidity (storage/transport): 30 % ... 70 % Ambient temperature (assembly): -5 °C ... 100 °C
Packaging specifications	Type of packaging: packed in cardboard