Dimensions | Width: 42.8 mm Height: 100 mm Depth: 101 mm
|
Notes | General: Designed to function with all 48 V DC QUINT and TRIO power supplies. Mode A PoE Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area
|
Mounting | Mounting type: DIN rail mounting
|
Interfaces | Fiber optic interface Connection method: SFP Transmission speed: 100/1000 Mbps (full duplex) Transmission physics: Depending on the SFP module Transmission length: up to 80 km (Depending on the fiber/SFP module used) No. of channels: 2 (SFP ports) Ethernet (PoE) Number of interfaces: 2 Connection method: RJ45 Transmission speed: 10/100/1000 Mbps Transmission physics: Ethernet RJ45 Transmission length: 100 m (Between transmitter / receiver) Signal LEDs: LNK/ACT, POE No. of channels: 2 (RJ45 ports)
|
Product properties | Type: Stand-Alone Product type: Switch Product family: Unmanaged PoE Switches 1000 MTTF: 45.9 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%) Switch functions Basic functions: Store-and-forward switch, 10/100/1000 Mbps, auto negotiation, redundant power supply, PoE according to IEEE 802.3at/802.3af, jumbo frames up to 10240 bytes, alarm contact Signal contact control voltage: 48 VDC Signal contact control current: 0.5 A Status and diagnostic indicators: LEDs: US1, US2 (redundant voltage supply), Alarm (alarm contact), Link/Activity and PoE per Ethernet port Additional functions: Autonegotiation Security functions Basic functions: Store-and-forward switch, 10/100/1000 Mbps, auto negotiation, redundant power supply, PoE according to IEEE 802.3at/802.3af, jumbo frames up to 10240 bytes, alarm contact
|
Electrical properties | Local diagnostics: US1, US2 Supply voltage Green LED PoE PoE detection Orange LED LNK/ACT Link status/data transmission Green/orange LED Alarm Power failure at US1 or US2/Link failure Supply Supply voltage (DC): 55 VDC (redundant) Supply voltage range: 52 VDC ... 57 VDC (>52 V DC for PoE+ recommended) Power supply connection: Via COMBICON, max. conductor cross section 2.5 mm² Inrush current: 25.7 A (52VDC for 1950üs) Residual ripple: 3.6 VPP (within the permitted voltage range) Max. current consumption: 1.2 A (Maximum, nominal load) Typical current consumption: 80 mA (at US = 55VDC) Function Signal contact control voltage: 48 VDC Signal contact control current: 0.5 A
|
Connection data | Connection technology Connection name: Power supply pluggable: yes Power supply Connection method: Screw connection Conductor cross section, rigid: 0.2 mm² ... 2.5 mm² Conductor cross section, flexible: 0.2 mm² ... 2.5 mm² Conductor cross section AWG: 24 ... 12 Stripping length: 7 mm
|
Environmental and real-life conditions | Ambient conditions Degree of protection: IP30 Ambient temperature (operation): -40°C ... 75°C Ambient temperature (storage/transport): -40°C ... 85°C Permissible humidity (operation): 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport): 5 % ... 95 % (non-condensing) Air pressure (operation): 57 kPa ... 108 kPa (up to 4850 m above mean sea level) Air pressure (storage/transport): 57 kPa ... 108 kPa (up to 4850 m above mean sea level)
|
Standards and regulations | Standards/specifications: EN 50121 for railway applications
|
Approvals | Conformity/Approvals Conformance: CE-compliant
|
EMC data | Conformance with EMC directives: IEC 61000-6-2 IEC 61000-4-2 (ESD) Criterion B IEC 61000-4-3 (immunity to radiated interference) Criterion A IEC 61000-4-4 (burst) Criterion A IEC 61000-4-5 (surge) Criterion B IEC 61000-4-6 (immunity to conducted interference) Criterion A IEC 61000-4-8 (immunity to magnetic fields) Criterion A EN 55022 (emitted interference) Criterion A Electromagnetic compatibility: Conformance with EMC Directive 2004/108/EC
|
System properties | Functionality Basic functions: Store-and-forward switch, 10/100/1000 Mbps, auto negotiation, redundant power supply, PoE according to IEEE 802.3at/802.3af, jumbo frames up to 10240 bytes, alarm contact
|
Signaling | Status display: LEDs: US1, US2 (redundant voltage supply), Alarm (alarm contact), Link/Activity and PoE per Ethernet port
|