Non disponibile 
| Dimensions | Width: 75 mm Height: 170 mm Depth: 152 mm |
| Notes | General: Designed to function with all 48 V DC QUINT and TRIO power supplies. Mode A or Mode B PoE Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area |
| Material specifications | Housing material: Aluminum |
| Mounting | Mounting type: DIN rail mounting |
| Interfaces | Ethernet (SFP) Number of interfaces: 1 Connection method: SFP Transmission speed: 100/1000 Mbps (full duplex) Transmission physics: Depending on the SFP module Transmission length: up to 80 km (Depending on the fiber/SFP module used) Signal LEDs: Data receive, link status No. of channels: 1 (SFP port) Ethernet (PoE) Connection method: RJ45 Note on the connection method: Auto negotiation and autocrossing Transmission speed: 10/100 Mbps Transmission physics: Ethernet in RJ45 twisted pair Transmission length: 100 m No. of channels: 4 (RJ45 ports) |
| Product properties | Type: Block design Product type: Switch Product family: Managed PoE Switches 4000 MTTF: 21.3 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%) Switch functions Diagnostic functions: RMON History LLDP (Link Layer Discovery Protocol) SNMP-Traps N:1-Portmirroring Basic functions: Store and forward switch, Extended Ring and IEEE redundancy, Multicast control, IGMP snooping, trunking, Port and Tagging VLANs, Port and IEEE 802.1x security, SNMP V3 and Https security, SNTP, web customization, user accounts, Modbus/TCP, PoE according to IEEE 802.3at/af. Filter functions: Quality of Service (8 and 64 priority classes) Port prioritization VLAN (up to 64 VLANs) IGMP Snooping (256 groups) IGMP Query IP parameterization: DHCP-Client BootP Management: Web-based management (HTTP/HTTPS) SNMPv1/v2/v3 Redundancy: ERR (Extended ring redundancy (15ms)) RSTP (Rapid Spanning Tree Protocol) MSTP (Multiple Spanning Tree Protocol) Status and diagnostic indicators: LEDs: US1, US2 (redundant voltage supply), Alarm (alarm contact), Link/Activity and PoE per Ethernet port Additional functions: Transmission of MMSandGOOSE (IEC 61850-8-1) Time synchronization: SNTP (Simple Network Time Protocol) Security functions Basic functions: Store and forward switch, Extended Ring and IEEE redundancy, Multicast control, IGMP snooping, trunking, Port and Tagging VLANs, Port and IEEE 802.1x security, SNMP V3 and Https security, SNTP, web customization, user accounts, Modbus/TCP, PoE according to IEEE 802.3at/af. |
| Electrical properties | Local diagnostics: US1, US2 Supply voltage Green LED LNK/ACT Link status/data transmission Green LED PoE PoE detection Orange LED Alarm Power failure at US1 or US2/Link failure Transmission medium: Copper FO Supply Supply voltage (DC): 55 VDC (redundant) Supply voltage range: 50 VDC ... 57 VDC (> 52 V DC for PoE+ or 60W output recommended) Inrush current: 43.6 A (52VDC for 1830üs) Residual ripple: 3.6 VPP (within the permitted voltage range) Max. current consumption: 3.9 A (Maximum, nominal load) Typical current consumption: 142 mA (US= 55VDC) |
| Connection data | Connection technology Connection name: Power supply pluggable: yes Power supply Connection method: Screw connection Conductor cross section, rigid: 0.2 mm² ... 2.5 mm² Conductor cross section, flexible: 0.2 mm² ... 2.5 mm² Conductor cross section AWG: 24 ... 12 Stripping length: 7 mm |
| Environmental and real-life conditions | Ambient conditions Degree of protection: IP30 Ambient temperature (operation): -40°C ... 75°C Ambient temperature (storage/transport): -40°C ... 85°C Permissible humidity (operation): 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport): 5 % ... 95 % (non-condensing) Air pressure (operation): 57 kPa ... 108 kPa (up to 4850 m above mean sea level) Air pressure (storage/transport): 57 kPa ... 108 kPa (up to 4850 m above mean sea level) |
| Standards and regulations | Standards/specifications: EN 50121 for railway applications |
| Approvals | Conformity/Approvals Conformance: CE-compliant |
| EMC data | Conformance with EMC directives: IEC 61000-6-2 IEC 61000-4-2 (ESD) Criterion B IEC 61000-4-3 (immunity to radiated interference) Criterion A IEC 61000-4-4 (burst) Criterion A IEC 61000-4-5 (surge) Criterion B IEC 61000-4-6 (immunity to conducted interference) Criterion A IEC 61000-4-8 (immunity to magnetic fields) Criterion A EN 55022 (emitted interference) Criterion A Noise immunity: EN 61000-6-2:2005 Electromagnetic compatibility: Conformance with EMC Directive 2004/108/EC Noise emission: EN 61000-6-4 |
| System properties | Functionality Basic functions: Store and forward switch, Extended Ring and IEEE redundancy, Multicast control, IGMP snooping, trunking, Port and Tagging VLANs, Port and IEEE 802.1x security, SNMP V3 and Https security, SNTP, web customization, user accounts, Modbus/TCP, PoE according to IEEE 802.3at/af. |
| Signaling | Status display: LEDs: US1, US2 (redundant voltage supply), Alarm (alarm contact), Link/Activity and PoE per Ethernet port |
| ECLASS | ECLASS-11.0: 19170401 ECLASS-12.0: 19170401 ECLASS-13.0: 19170401 |
| ETIM | ETIM 9.0: EC000734 |
| UNSPSC | UNSPSC 21.0: 43222600 |
Di seguito alcuni articoli correlati a quello che stai vedendo
