Automazione Industriale

Meccatronica

Sicurezza Industriale

Componenti Quadri

Sensori e Sistemi di Visione

Pneumatica

Network e Comunicazione

Cavi Speciali

Software di progettazione

Accedi ai servizi

Entra nella tua area riservata

Accedi ai servizi

Entra nella tua area riservata

PHOENIX CONTACT 1026937
PHOENIX CONTACTNon disponibile

FL SWITCH 1001T-4POE-GT - Industrial Ethernet Switch

Unmanaged PoE Switches 1000, 1 RJ45 port 10/100/1000 Mbps, 4 RJ45 ports 10/100/1000 Mbps
Cod. Articolo: 1026937
Cod. Fornitore: 1026937
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Caratteristiche Tecniche
Specifiche
Descrizione
Download
Caratteristiche Tecniche
DimensionsWidth: 30 mm
Height: 149 mm
Depth: 107.8 mm
NotesGeneral: Mode A PoE
Utilization restriction
EMC note: EMC: class A product, see manufacturer's declaration in the download area
MountingMounting type: DIN rail mounting
InterfacesEthernet
Connection method: RJ45
Note on the connection method: Auto negotiation and autocrossing
Transmission speed: 10/100/1000 Mbps
Transmission physics: Ethernet RJ45
Transmission length: 100 m (Between transmitter / receiver)
Signal LEDs: LNK/ACT, POE
No. of channels: 1 (RJ45 port)
Ethernet (PoE)
Connection method: RJ45
Transmission speed: 10/100/1000 Mbps
Transmission physics: Ethernet RJ45
Transmission length: 100 m (Between transmitter / receiver)
Signal LEDs: LNK/ACT, POE
No. of channels: 4 (RJ45 ports)
Product propertiesType: Stand-Alone
Product type: Switch
Product family: Unmanaged PoE Switches 1000
MTTF: 72.1 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%)
Switch functions
Basic functions: Store-and-forward switch, 10/100/1000 Mbps, auto negotiation, redundant power supply, PoE according to IEEE 802.3at/802.3af, jumbo frames up to 10240 bytes, alarm contact
Signal contact control voltage: 48 VDC
Signal contact control current: 0.5 A
Status and diagnostic indicators: LEDs: US1, US2 (redundant voltage supply), Alarm (alarm contact), Link/Activity and PoE per Ethernet port
Additional functions: Autonegotiation
Security functions
Basic functions: Store-and-forward switch, 10/100/1000 Mbps, auto negotiation, redundant power supply, PoE according to IEEE 802.3at/802.3af, jumbo frames up to 10240 bytes, alarm contact
Electrical propertiesLocal diagnostics: US1, US2 Supply voltage Green LED
PoE PoE detection Orange LED
LNK/ACT Link status/data transmission Green LED
Alarm Power failure at US1 or US2/Link failure
Supply
Supply voltage (DC): 24 VDC
Supply voltage: 48 VDC
Supply voltage range: 18 VDC ... 57 VDC
Power supply connection: Via COMBICON, max. conductor cross section 2.5 mm²
Inrush current: 32.1 A (24VDC for 3540μs)
Residual ripple: 3.6 VPP (within the permitted voltage range)
Max. current consumption: 6.93 A (Maximum, nominal load)
Typical current consumption: 165 mA (at US = 24VDC)
Function
Signal contact control voltage: 48 VDC
Signal contact control current: 0.5 A
Connection dataConnection technology
Connection name: Power supply
Power supply
Connection method: Screw connection
Conductor cross section, rigid: 0.2 mm² ... 2.5 mm²
Conductor cross section, flexible: 0.2 mm² ... 2.5 mm²
Conductor cross section AWG: 24 ... 12
Stripping length: 7 mm
Environmental and real-life conditionsAmbient conditions
Degree of protection: IP30
Ambient temperature (operation): -40°C ... 75°C
Ambient temperature (storage/transport): -40°C ... 85°C
Permissible humidity (operation): 5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport): 5 % ... 95 % (non-condensing)
Air pressure (operation): 57 kPa ... 108 kPa (up to 4850 m above mean sea level)
Air pressure (storage/transport): 57 kPa ... 108 kPa (up to 4850 m above mean sea level)
ApprovalsConformity/Approvals
Conformance: CE-compliant
EMC dataConformance with EMC directives: IEC 61000-6-2 IEC 61000-4-2 (ESD) Criterion B
IEC 61000-4-3 (immunity to radiated interference) Criterion A
IEC 61000-4-4 (burst) Criterion A
IEC 61000-4-5 (surge) Criterion B
IEC 61000-4-6 (immunity to conducted interference) Criterion A
IEC 61000-4-8 (immunity to magnetic fields) Criterion A
EN 55022 (emitted interference) Criterion A
Electromagnetic compatibility: Conformance with EMC Directive 2004/108/EC
System propertiesFunctionality
Basic functions: Store-and-forward switch, 10/100/1000 Mbps, auto negotiation, redundant power supply, PoE according to IEEE 802.3at/802.3af, jumbo frames up to 10240 bytes, alarm contact
SignalingStatus display: LEDs: US1, US2 (redundant voltage supply), Alarm (alarm contact), Link/Activity and PoE per Ethernet port
Specifiche
ECLASSECLASS-11.0: 19170402
ECLASS-12.0: 19170402
ECLASS-13.0: 19170402
ETIMETIM 9.0: EC000734
UNSPSCUNSPSC 21.0: 43222600
Descrizione
PoE+ Ethernet switch conforms to IEEE 802.3at. Includes four 10/100/1000 Mbps PoE+ ports, one standard 10/100/1000 Mbps RJ45 port, a total PoE system budget of 120 W, and jumbo frames up to 10240 bytes.
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Approvals_01640.pdf

Approvals_01776.pdf

Data_sheet_00217.pdf

Manufacturer_declaration_00153.pdf

Manufacturer_declaration_02940.pdf

Manufacturer_declaration_05473.pdf

Manufacturer_declaration_05908.pdf

Package_slip_00108.pdf

Technical_drawing_05950.pdf

Various_00003.pdf