1043463 PHOENIX CONTACT - Technology Bsa

VIOK 1,5-3D/PE-EX BU - Sensor/actuator terminal block

Sensor/actuator terminal block, nom. voltage: 400 V, nominal current: 24 A, connection method: Screw connection, 2nd, 3rd and 4th level, Rated cross section: 2.5 mm², cross section: 0.2 mm² - 4 mm², mounting type: NS 35/7,5, NS35/15, color: blue

Cod. Articolo: 1043463

Cod. Fornitore: 1043463

PHOENIX CONTACT

Product properties	Product type: Sensor/actuator terminal block Number of connections: 7 Number of rows: 4 Insulation characteristics Overvoltage category: III Degree of pollution: 3
Electrical properties	Rated surge voltage: 6 kV Maximum power dissipation for nominal condition: 0.77 W
Connection data	Grounding foot: Yes Number of connections per level: 2 Nominal cross section: 2.5 mm² 2nd, 3rd and 4th level Screw thread: M3 Note: Please observe the current carrying capacity of the DIN rails. Tightening torque: 0.5 ... 0.6 Nm Stripping length: 8 mm Internal cylindrical gage: A3 Connection in acc. with standard: IEC 60947-7-1/IEC 60947-7-2 Conductor cross section rigid: 0.2 mm² ... 4 mm² Cross section AWG: 24 ... 12 (converted acc. to IEC) Conductor cross section flexible: 0.2 mm² ... 2.5 mm² Conductor cross section, flexible [AWG]: 24 ... 14 (converted acc. to IEC) Conductor cross-section flexible (ferrule without plastic sleeve): 0.25 mm² ... 2.5 mm² Flexible conductor cross section (ferrule with plastic sleeve): 0.25 mm² ... 2.5 mm² Cross-section with insertion bridge, rigid: 4 mm² Cross-section with insertion bridge, flexible: 2.5 mm² Nominal current: 24 A Maximum load current: 26 A (with a 2.5 mm² conductor cross section) Nominal voltage: 400 V (when using EB insertion bridges, the nominal voltage is reduced to 250 V.) Nominal cross section: 2.5 mm²
Ex data	Rated data (ATEX/IECEx) Identification: Ã¯ II2GEx e IIC Gb Operating temperature range: -50°C ... 110°C Ex-certified accessories: 1205053 SZS 0,6X3,5 1201442 E/UK List of bridges: Insertion bridge/EB 2- DIK GY/2715898 Insertion bridge/EB 2- DIK RD/2716693 Insertion bridge/EB 2- DIK BU/2716648 Insertion bridge/EB 3- DIK GY/2715908 Insertion bridge/EB 3- DIK RD/2716745 Insertion bridge/EB 3- DIK BU/2716651 Insertion bridge/EB 10- DIK GY/2715937 Insertion bridge/EB 10- DIK RD/2716774 Insertion bridge/EB 10- DIK BU/2716680 Bridge data: 16 A/25 mm²ÃT45 K Ex temperature increase: 37 K (20 A / 2.5mm²) Rated voltage: 176 V at bridging with insertion bridge: 176 V for bridging with bridge: 176 V Rated insulation voltage: 160 V output: (Permanent) Ex level General Rated current: 20 A (ÃT 45 K) Maximum load current: 25 A (ÃT 45 K) Ex connection data General Torque range: 0.5 Nm ... 0.6 Nm Nominal cross section: 2.5 mm² Rated cross section AWG: 14 Connection capacity rigid: 0.2 mm² ... 4 mm² Connection capacity AWG: 24 ... 12 24 ... 14 Connection capacity flexible: 0.2 mm² ... 2.5 mm² 2 conductors with same cross section, solid: 0.2 mm² ... 1 mm² 2 conductors with the same cross-section AWG rigid: 24 ... 17 2 conductors with same cross section, stranded: 0.2 mm² ... 1 mm² 2 conductors with the same cross-section AWG flexible: 24 ... 17 output: (Permanent) Ex level Level 1 Contact resistance: 0.8 mÃ© output: (Permanent) Ex level Level 2 Contact resistance: 0.6 mÃ© output: (Permanent) Ex level Level 3 Contact resistance: 0.5 mÃ© output: (Permanent) Ex level Contact resistance: 1.1 Ã©
Dimensions	Width: 6.2 mm Height: 82.5 mm Depth on NS35/7,5: 70 mm Depth on NS35/15: 77.5 mm
Material specifications	Color: blue Flammability rating according to UL 94: V2 Insulating material group: I Insulating material: PA
Mechanical properties	Mechanical data Open side panel: No
Environmental and real-life conditions	Ambient conditions Ambient temperature (operation): -60°C ... 105°C (max. short-term operating temperature RTI Elec.) Ambient temperature (storage/transport): -25°C ... 60°C (for a short time, not exceeding 24h, -60°C to +70°C) Ambient temperature (assembly): -5°C ... 70°C Ambient temperature (actuation): -5°C ... 70°C Permissible humidity (storage/transport): 30 % ... 70 %
Standards and regulations	Connection in acc. with standard: IEC 60947-7-1/IEC 60947-7-2
Mounting	Mounting type: NS 35/7,5 NS35/15