1081335 PHOENIX CONTACT - Technology Bsa

EV-CC-AC1-M3-CC-SER-HS-MSTB - AC charging controller

The EV-CC-AC1-M3-CBC-SER-HS-MSTB charging controller with housing for DIN rail mounting and plug-in connection technology is used to charge electric vehicles on the 3-phase AC power grid in accordance with IEC 61851-1, mode 3. Optimized for charging stations with permanently mounted vehicle charging connector. All charging functions and comprehensive configuration settings are already integrated.

Cod. Articolo: 1081335

Cod. Fornitore: 1081335

PHOENIX CONTACT

Product properties	Product type: AC charging controller Product family: CHARX control basic Application: AC charging controller for private and commercial applications (EU/CN) Operating mode: Stand-Alone Charging mode: Mode 3, Case C
System properties	Charging controllers Number of charging points: 1
Electrical properties	Type of charging current: AC Current consumption: < 1 W Note on the connection method: with MSTB connection Supply Supply voltage: 230 V Supply voltage range: 100 VAC ... 240 VAC (nominal voltage range) Max. current consumption: 40 mA Nominal power consumption: < 1 W (No-load) Frequency range: 50 Hz ... 60 Hz
Input data	Digital Number of digital inputs: 5 Frequency range: 50 Hz ... 60 Hz Nominal power consumption: < 0.5 W (No-load) Nominal current I_N: Ã¢¤ 1 mA Nominal input voltage U_N: 12 V Input voltage range U1: 0 V ... 3 V (Off) Input voltage range U2: 9 V ... 15 V (On)
Output data	Digital Output name: 4digital outputs Connection technology: Spring-cage connection Maximum output voltage: 30 V Maximum output current: 0.5 A (Total current for all outputs; internally supplied) 0.6 A (Per output; externally supplied) Switching Output name: Relay output C_1.2 Minimum switching capacity: 1500 VA Maximum switching voltage: 250 VAC (External supply) Max. switching current: 6 A
Connection data	Conductor connection Connection method: Plug-in push-in spring-cage connection Conductor cross section rigid: 0.2 mm² ... 2.5 mm² Conductor cross section flexible: 0.2 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16
Interfaces	Interface: RS-485 RS-485 Interface: RS-485 2-wire Bus system: RS-485 Connection method: Pluggable spring-cage terminal blocks Number of interfaces: 1 Transmission speed: 9.6 kbps (Standard) Transmission speed range: 9.6 kbps ... 19.2 kbps (adjustable) Data flow control/protocols: Modbus/RTU (slave)
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -35°C ... 70°C Ambient temperature (storage/transport): -40°C ... 85°C Permissible humidity (operation): 30 % ... 95 %
Approvals	Conformity/Approvals Conformance: CE-compliant
Standards and regulations	Standards Standards/regulations: IEC 61851-1
Mounting	Mounting type: DIN rail mounting Mounting position: any