Dimensions | Dimensional drawing: https://caas.production.phoenixcontact.coremedia.cloud/caas/v1/stable/media/22530/full/b250?format=jpg Width: 14.9 mm Height: 62.2 mm Depth: 62 mm
|
Notes | Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area
|
Interfaces | SmartElement interface Number of interfaces: 1 Connection method: Card edge connector Transmission speed: See system in which you use the SmartElement. Start time until ready to operate: < 500 ms
|
System properties | Module ID code (hex): none Process data channel: 80 bit Input address area: 10 Byte Output address area: 10 Byte Required parameter data: 19 Byte Required configuration data: 7 Byte
|
Input data | Digital Input name: Digital inputs Description of the input: EN 61131-2, type 3 Number of inputs: 2 (DI Ref, DI L) Connection method: Push-in connection Connection technology: 1-conductor Input voltage range "0" signal: -3 VDC ... 5 VDC Input voltage range "1" signal: 11 VDC ... 30 VDC Nominal input voltage UIN: 24 VDC Nominal input current at UIN: 3 mA Protective circuit: Transient protection; Suppressor diode Encoder Number of inputs: 1 (A, /A, B, /B, Z, /Z) Input name: Incremental encoder input Encoder signals: symmetrical encoders, in accordance with EIA-422 Cable length: max. 30 m (Shielded cable)
|
Product properties | Type: modular Product type: I/O component Product family: Axioline SmartElements Mounting position: See the system in which the SmartElement is used. Insulation characteristics Overvoltage category: II (IEC 60664-1, EN60664-1) Pollution degree: 2 (IEC 60664-1, EN60664-1)
|
Electrical properties | Encoder Number: 1 (+5V) 1 (+24V) 1 (A, /A, B, /B, Z, /Z) Nominal output voltage: 5 VDC 24 VDC Voltage range: 5 VDC ... 5.5 VDC 19.2 VDC ... 30 VDC Current carrying capacity: max. 250 mA max. 500 mA Protective circuit: Short-circuit protection; Electrical and thermal Overload protection Transient protection; Suppressor diode Short-circuit protection; Electrical (from approx. 600mA) Overload protection Transient protection; Suppressor diode Designation: Symmetrical incremental encoders Signal voltage level: Differential signal (signal â inverted signal), in accordance with EIA-422 Common mode voltage range signal - ground: -20 VDC ... 20 VDC Input frequency: max. 1 MHz Potentials: Communications power supply of the Smart Elements (U Supply voltage: using card edge connectors Potentials: I/O supply (U Supply voltage: 24 VDC (using card edge connectors) Supply voltage range: 19.2 VDC ... 30 VDC (including all tolerances, including ripple) Current draw: max. 700 mA typ. 512 mA Current consumption: min. 11 mA (without connected peripherals) Power consumption: max. 21 W (of which 1.55W internal losses) min. 264 mW Protective circuit: Surge protection; See the system in which the SmartElement is used. Reverse polarity protection; Polarity protection diode Electrical isolation/isolation of the voltage ranges Test voltage: Communications supply / 24 V supply (I/O): 500 VAC, 50 Hz, 1 min. Test voltage: Communications supply / functional ground: 500 VAC, 50 Hz, 1 min. Test voltage: 24V supply (I/O) / functional ground: 500 VAC, 50 Hz, 1 min.
|
Connection data | Connection technology Connection name: I/O Note on the connection method: Please observe the information provided on conductor cross sections in the âAxiolineSmartElementsâ user manual. Conductor connection Connection method: Push-in connection Conductor cross section rigid: 0.25 mm² ... 1.5 mm² Conductor cross section flexible: 0.25 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Conductor cross section flexible, with ferrule without plastic sleeve: 0.25 mm² ... 1.5 mm² Conductor cross section, flexible, with ferrule, with plastic sleeve: 0.25 mm² ... 1.5 mm² Stripping length: 8 mm I/O Connection method: Push-in connection Note on the connection method: Please observe the information provided on conductor cross sections in the âAxiolineSmartElementsâ user manual. Conductor cross section, rigid: 0.25 mm² ... 1.5 mm² Conductor cross section, flexible: 0.25 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Conductor cross section, flexible, with ferrule, with plastic sleeve: 0.25 mm² ... 1.5 mm² Conductor cross section flexible, with ferrule without plastic sleeve: 0.25 mm² ... 1.5 mm² Stripping length: 8 mm
|
Environmental and real-life conditions | Ambient conditions Ambient temperature (operation): -25°C ... 60°C Degree of protection: IP20 Air pressure (operation): 70 kPa ... 106 kPa (up to 3000m above sea level) Air pressure (storage/transport): 70 kPa ... 106 kPa (up to 3000m above sea level) Ambient temperature (storage/transport): -40°C ... 85°C Permissible humidity (operation): 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport): 5 % ... 95 % (non-condensing)
|
Standards and regulations | Protection class: III (IEC 61140, EN61140, VDE0140-1)
|
Mounting | Mounting type: Smart Element slot Mounting position: See the system in which the SmartElement is used.
|