1099593 PHOENIX CONTACT - Technology Bsa

VAL-MS-T1/T2 1000DC-PV/2+V-FM/40 - Lightning/surge arrester type 1/2

Lightning current arrester/surge protective device for 2-pos. isolated and grounded 1,000VDC PV voltage systems, for DIN rail mounting, 3-pos. base element with remote indication contact, three pluggable temperature-monitored protective elements, status message at each plug.

Cod. Articolo: 1099593

Cod. Fornitore: 1099593

PHOENIX CONTACT

Notes	General Note: The device is intended for touch proof installation in a housing. Ensure that there is a gap of at least 8 mm between the active and grounded parts in the connection area.
Product properties	IEC test classification: PV I / II PV T1 / T2 EN type: T1 / T2 IEC power supply system: DC Type: DIN rail module, two-section, divisible Distance between live and grounded parts: 8 mm Product type: PV arrester Product family: VALVETRAB MS Installation location: Interior Installation location of the disconnect device: Internal Accessibility: Accessible Connection configuration: Y configuration SPD failure behavior: OCFM (Open-Circuit Failure Mode) Surge protection fault message: Optical, remote indicator contact Insulation characteristics Overvoltage category: III Pollution degree: 2
Electrical properties	Indicator/remote signaling Connection name: Remote fault indicator contact Switching function: Changeover contact Operating voltage: 5 VAC ... 250 VAC 30 VDC Operating current: 5 mA AC ... 1.5 A AC 1 ADC
Connection data	Connection method: Screw connection Fork-type cable lug Screw thread: M5 Tightening torque: 3 Nm (1.5mm² ... 16mm²) 4.5 Nm (25mm²...35mm²) Stripping length: 16 mm Conductor cross section flexible: 1.5 mm² ... 25 mm² 1.5 mm² ... 16 mm² Conductor cross section rigid: 1.5 mm² ... 35 mm² Conductor cross section AWG: 15 ... 2 Remote fault indicator contact Connection method: Plug-in/screw connection via COMBICON Screw thread: M2 Tightening torque: 0.25 Nm Stripping length: 7 mm Conductor cross section flexible: 0.14 mm² ... 1.5 mm² Conductor cross section rigid: 0.14 mm² ... 1.5 mm² Conductor cross section AWG: 28 ... 16
Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/0e4a0832d4206348bed6ca2ea11b5b69/-S204x204-FJPG Width: 53.4 mm Height: 98.7 mm Depth: 65.7 mm (incl. DIN rail 7.5mm) Horizontal pitch: 3 Div.
Material specifications	Flammability rating according to UL 94: V-0 CTI value of material: 600 Insulating material: PA 6.6-FR PBT-FR Material group: I Housing material: PA 6.6-FR PBT-FR
Mechanical properties	Mechanical data Open side panel: No
Protective circuit	Mode of protection: (DC+) - (DC-) (DC+/DC-) - PE Direction of action: (L+)-PE & (L-)-PE & (L+)-(L-) Rated load current I_L: 80 A Residual current I_PE: Ã¢¤ 20 µA DC Ã¢¤ 350 µA AC Standby power consumption P_C: Ã¢¤ 25 mVA Nominal discharge current I_n (8/20) µs: 15 kA Maximum discharge current I_max (8/20) µs: 40 kA Impulse discharge current (10/350)µs, charge: 2.5 As Impulse discharge current (10/350)µs, specific energy: 6.25 kJ/Ã© Impulse discharge current (10/350)µs, peak value l_imp: 5 kA Total discharge current I_total(8/20)µs: 40 kA Total discharge current I_total (10/350)µs: 5 kA Voltage protection level U_p: Ã¢¤ 3.5 kV Residual voltage U_res: Ã¢¤ 3.5 kV (at I_n) Ã¢¤ 2.9 kV (at 5 kA) Ã¢¤ 3.2 kV (at 10 kA) Ã¢¤ 3.7 kV (at 20 kA) Ã¢¤ 4.1 kV (at 30 kA) Ã¢¤ 4.6 kV (at 40 kA) Response time t_A: Ã¢¤ 25 ns PV protective circuit Connection configuration: Y configuration SPD failure behavior: OCFM (Open-Circuit Failure Mode) Protective circuit DC voltage side (DC) Open circuit voltage U_OCSTC: Ã¢¤ 975 VDC Maximum discharge current I_max (8/20) µs: 40 kA Response time t_A: Ã¢¤ 25 ns Impulse discharge current (10/350)µs, charge: 2.5 As Impulse discharge current (10/350)µs, specific energy: 6.25 kJ/Ã© Impulse discharge current (10/350)µs, peak value l_imp: 5 kA Total discharge current I_total(8/20)µs: 40 kA Total discharge current I_total (10/350)µs: 5 kA Insulation resistance R_iso: > 5 GÃ© (at 500 V DC) Nominal discharge current I_n (8/20) µs: 15 kA Rated load current I_L: 80 A Continuous operating current I_CPV: < 20 µA Maximum continuous operating voltage U_CPV: 1170 VDC Short-circuit current rating I_SCPV: 2000 A Residual voltage U_res: Ã¢¤ 3.5 kV (at I_n) Ã¢¤ 2.9 kV (at 5 kA) Ã¢¤ 3.2 kV (at 10 kA) Ã¢¤ 3.7 kV (at 20 kA) Ã¢¤ 4.1 kV (at 30 kA) Ã¢¤ 4.6 kV (at 40 kA) Residual current I_PE: Ã¢¤ 20 µA DC Ã¢¤ 350 µA AC Voltage protection level U_p: Ã¢¤ 3.5 kV Standby power consumption P_C: Ã¢¤ 25 mVA
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 (only when all terminal points are used) Ambient temperature (operation): -40°C ... 80°C Ambient temperature (storage/transport): -40°C ... 80°C Altitude: Ã¢¤ 2000 m (amsl) Permissible humidity (operation): 5 % ... 95 % Shock (operation): 60g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) Vibration (operation): 7.5g (5-500 Hz/2.5 h/XYZ)
Approvals	UL specifications Maximum continuous operating voltage MCOV: 1170 VDC Short-circuit current rating (SCCR): 50 kA Voltage protection rating VPR: 3 kV Nominal discharge current I_n: 10 kA Mode of protection: (L+) - (L-) (L+) - G (L-) - G Nominal voltage: 1170 VDC Power distribution system: DCPV SPD Type: 1CA UL indicator/remote signaling Operating voltage: 125 VAC AC operating current: 1 A AC UL connection data Tightening torque: 30 lb_f-in. Conductor cross section AWG: 14 ... 2
Standards and regulations	Standards/specifications: EN61643-31 IEC 61643-31 Note: 2019 2018
Mounting	Mounting type: DIN rail: 35 mm