1177624 PHOENIX CONTACT - Technology Bsa

SACC-PO12MS-5CT-CL SH - Connector

Connector, Universal, 5-position, shielded, Plug straight M12 Push-Pull, coding: A, Crimp connection, knurl material: PA 6.6, external cable diameter 6.5 mm ... 10 mm, without crimp contacts

Cod. Articolo: 1177624

Cod. Fornitore: 1177624

PHOENIX CONTACT

Notes	General: NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g.by using cable ties.
Mounting	Assembly instructions: Contacts can be clipped in place and unclipped without tools Connection method: Crimp connection
Product properties	Product type: Circular connector (cable-side) Sensor type: Universal Number of positions: 5 No. of cable outlets: 1 Shielded: yes Coding: A Cable outlet: straight Insulation characteristics Overvoltage category: III Degree of pollution: 3
Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/0953f66c5eae5b47a7366cf8f12cd6ef/-S204x204-FJPG Length: 44 mm Wrench size, union nut: 15 mm Wrench size, counter nut: 14 mm External dimensions Outside diameter: 6.5 mm ... 10 mm Housing Diameter housing: 22 mm
Material specifications	Flammability rating according to UL 94: V0 Seal material: NBR Material of grip body: Zinc die-cast, nickel-plated Contact carrier material: PA 6.6 Material for screw connection: PA 6.6 Standards/regulations: PA 6.6: Fire protection in rail vehicles - requirement sets R22, R23, R24, and R26 acc. to DINEN45545-2 (Risk level HL1 - HL3)
Connection data	Conductor connection Connection method: Crimp connection Connection cross section: 0.14 mm² ... 1 mm² (flexible) Connection cross section AWG: 26 ... 18 (flexible) Stripping length of the individual wire: 4 mm +0,5mm Tightening torque: 4 Nm (Pressure nut with coupling sleeve)
Electrical properties	Rated surge voltage: 1.5 kV Insulation resistance: Ã¢¥ 100 MÃ© Nominal voltage U_N: 48 VAC 60 VDC Nominal current I_N: 4 A
Mechanical properties	Mechanical data Insertion/withdrawal cycles: Ã¢¥ 100
Connector	Connection 1 Head design: Plug Head cable outlet: straight Head thread type: M12 Head locking type: Push-Pull Coding: A
Cable/line	Signal type/category: Universal Stripping length of the individual wire: 4 mm +0,5mm
Environmental and real-life conditions	Ambient conditions Degree of protection: IP65 IP67 IP68 IP69K Ambient temperature (operation): -40°C ... 85°C (Plug / socket)
Standards and regulations	Testing Standards/regulations: PA 6.6: Fire protection in rail vehicles - requirement sets R22, R23, R24, and R26 acc. to DINEN45545-2 (Risk level HL1 - HL3) Standard designation: M12 connector Shock, vibration Standards/specifications: IEC 61076-2-101 EN50155:2001 Note: In line with