Automazione Industriale

Meccatronica

Sicurezza Industriale

Componenti Quadri

Sensori e Sistemi di Visione

Pneumatica

Network e Comunicazione

Cavi Speciali

Software di progettazione

Accedi ai servizi

Entra nella tua area riservata

Accedi ai servizi

Entra nella tua area riservata

PHOENIX CONTACT 1350428
PHOENIX CONTACTNon disponibile

PTVME 6/S BU - Test disconnect terminal block

Test disconnect terminal block, nom. voltage: 1000 V, nominal current: 30 A, connection method: Push-in connection, Rated cross section: 6 mm2, cross section: 0.5 mm2 - 6 mm2 , color: blue
Cod. Articolo: 1350428
Cod. Fornitore: 1350428
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Caratteristiche Tecniche
Descrizione
Caratteristiche Tecniche
Product propertiesProduct type: Test disconnect terminal block
Number of connections: 2
Number of rows: 1
Potentials: 1
Data management status
Article revision: 01
Insulation characteristics
Overvoltage category: III
Degree of pollution: 3
Electrical propertiesRated surge voltage: 8 kV
Maximum power dissipation for nominal condition: 1.31 W
Connection dataNumber of connections per level: 2
Nominal cross section: 6 mm²
Level 1+2
Stripping length: 10 mm ... 12 mm
Internal cylindrical gage: A4
B4
Connection in acc. with standard: IEC 60947-7-1
Conductor cross section rigid: 0.5 mm² ... 6 mm²
Cross section AWG: 20 ... 10 (converted acc. to IEC)
Conductor cross section flexible: 0.5 mm² ... 6 mm²
Conductor cross section, flexible [AWG]: 20 ... 10 (converted acc. to IEC)
Conductor cross-section flexible (ferrule without plastic sleeve): 0.5 mm² ... 6 mm² Connection only with corresponding crimp versions.
Flexible conductor cross section (ferrule with plastic sleeve): 0.5 mm² ... 6 mm² Connection only with corresponding crimp versions.
Conductor cross-section flexible (2 conductors with the same cross-section, with TWIN ferrule and plastic sleeve): 0.5 mm² ... 2.5 mm²
Nominal current: 30 A (with 6 mm² conductor cross section)
Maximum load current: 30 A (with 6 mm² conductor cross section)
Nominal voltage: 1000 V
Nominal cross section: 6 mm²
Level 1+2 Connection cross sections directly pluggable
Conductor cross section rigid: 0.75 mm² ... 6 mm²
Conductor cross-section flexible (ferrule without plastic sleeve): 1.5 mm² ... 6 mm² Connection only with corresponding crimp versions.
Flexible conductor cross section (ferrule with plastic sleeve): 1 mm² ... 6 mm² Connection only with corresponding crimp versions.
DimensionsWidth: 8.2 mm
End cover width: 2.2 mm
Height: 82 mm
Depth on NS 35/7,5: 54.5 mm
Depth on NS 35/15: 62 mm
Material specificationsColor: blue (RAL 5015)
Flammability rating according to UL 94: V0
Insulating material group: I
Insulating material: PA
Static insulating material application in cold: -60 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)): 130 °C
Relative insulation material temperature index (Elec., UL 746 B): 130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22: HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23: HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24: HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26: HL 1 - HL 3
Calorimetric heat release NFPA 130 (ASTM E 1354): 28 MJ/kg
Surface flammability NFPA 130 (ASTM E 162): passed
Specific optical density of smoke NFPA 130 (ASTM E 662): passed
Smoke gas toxicity NFPA 130 (SMP 800C): passed
Electrical testsSurge voltage test
Test voltage setpoint: 9.8 kV
Result: Test passed
Temperature-rise test
Requirement temperature-rise test: Increase in temperature ≤ 45 K
Result: Test passed
Short-time withstand current 4 mm²: 0.5 kA
0.15 kA
1.25 kA
Power-frequency withstand voltage
Test voltage setpoint: 2.2 kV
Result: Test passed
Mechanical propertiesMechanical data
Open side panel: Yes
Mechanical testsMechanical strength
Result: Test passed
Test for conductor damage and slackening
Rotation speed: 10 rpm
Revolutions: 135
Conductor cross section/weight: 0.5 mm² / 0.3 kg
6 mm² / 1.4 kg
Result: Test passed
Environmental and real-life conditionsAging
Result: Test passed
Needle-flame test
Time of exposure: 30 s
Result: Test passed
Oscillation/broadband noise
Specification: DIN EN 50155 (VDE 0115-200):2018-05
Spectrum: Service life test category 2, bogie-mounted
Frequency: f1 = 5 Hz to f2 = 250 Hz
ASD level: 6.12 (m/s²)²/Hz
Acceleration: 3.12g
Test duration per axis: 5 h
Test directions: X-, Y- and Z-axis
Result: Test passed
Shocks
Pulse shape: Half-sine
Acceleration: 30g
Shock duration: 18 ms
Number of shocks per direction: 3
Test directions: X-, Y- and Z-axis (pos. and neg.)
Result: Test passed
Ambient conditions
Ambient temperature (operation): -60 °C ... 110 °C (Operating temperature range incl. self-heating; for max. short-term operating temperature, see RTI Elec.)
Ambient temperature (storage/transport): -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly): -5 °C ... 70 °C
Ambient temperature (actuation): -5 °C ... 70 °C
Permissible humidity (operation): 20 % ... 90 %
Permissible humidity (storage/transport): 30 % ... 70 %
Standards and regulationsConnection in acc. with standard: IEC 60947-7-1
MountingMounting type: NS 35/15
NS 35/7,5
Descrizione
PTVME 6/S BU Morsetto sez.x conv.misura