1357875 PHOENIX CONTACT - Technology Bsa

FL MGUARD 4305 - Router

Security-Router, 5 RJ45 ports (WAN, 3x LAN, DMZ (XF5)) 10/100/1000 Mbps, NAT, VPN, Development process certified in accordance with IEC 62443-4-1, Compatible with IEC 62443-4-2, Configurable stateful inspection firewall with full scope of functions, safe isolation for PROFIsafe in accordance with IEC 61784-3-3, user firewall, conditional firewall, rule sets

Cod. Articolo: 1357875

Cod. Fornitore: 1357875

PHOENIX CONTACT

Dimensions	Width: 45 mm Height: 130 mm Depth: 133.8 mm
Notes	Note on application Note on application: Only for industrial use
Material specifications	Color: gray Housing material: Plastic
Interfaces	Ethernet Connection method: RJ45 Transmission speed: 10/100/1000 Mbps Transmission physics: Ethernet in RJ45 twisted pair Transmission length: 100 m (per segment) Signal LEDs: Supply voltage, data transmission, error, link, activity No. of channels: 5 (RJ45 ports (WAN, 3x LAN, DMZ (XF5)))
System properties	System requirements Supported browsers: HTTPS support required
Product properties	Product type: Security router for the DIN rail Product family: Security-Router Type: Stand-Alone Special properties: NAT VPN Development process certified in accordance with IEC 62443-4-1 Compatible with IEC 62443-4-2 Data management status Article revision: 03 Insulation characteristics Protection class: III (IEC 61140, EN 61140, VDE 0140-1) Security functions 1:1 Network Address Translation (NAT) in the VPN: supported Number of VPN tunnels: 250 Authentication: X.509v3 certificates with RSA or PSK Data integrity: MD5, SHA-1, SHA 256, SHA-512 Dynamic Host Configuration Protocol (DHCP) support: Server or Relay Agent Filtering: MAC and IP addresses, ports, protocols Firewall data throughput: max. 650 Mbps (Router mode, default firewall rules, unidirectional throughput) max. 650 Mbps (Stealth mode, default firewall rules, unidirectional throughput) Firewall rules: Configurable stateful inspection firewall with full scope of functions, safe isolation for PROFIsafe in accordance with IEC 61784-3-3, user firewall, conditional firewall, rule sets Internet Protocol Security (IPsec) mode: ESP tunnel / ESP transport Link Layer Discovery Protocol (LLDP): As per protocol 802.2 Network Time Protocol (NTP) client: Client/server Remote Syslog Logging: on externals server Routing: Standard routing, NAT, 1:1-NAT, port forwarding Protection against: IP spoofing, DoS and Syn Flood Protection Encryption methods: DES, 3DES, AES-128, -192, -256
Electrical properties	Local diagnostics: US1, US2 Supply voltage US1, US2 Green LED One LED per port Link active / Speed Green / green/yellow LED Maximum power dissipation for nominal condition: typ. 2.88 W Supply Supply voltage (DC): 24 V DC (redundant) Supply voltage range: 12 V DC ... 36 V DC Power supply connection: via COMBICON, max. conductor cross section 1.5 mm² Residual ripple: 3.6 V_PP (within the permitted voltage range) Max. current consumption: 1 A Typical current consumption: 120 mA (at U_S = 24 V DC) Function Signal contact control voltage: 24 V DC (typical) Signal contact control current: 250 mA (short-circuit-proof)
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -40 °C ... 60 °C Ambient temperature (storage/transport): -40 °C ... 70 °C Permissible humidity (operation): 5 % ... 95 % (non-condensing)
Standards and regulations	Free from substances that could impair the application of coating: Yes
Approvals	Conformity/Approvals Conformance: CE-compliant
Mounting	Mounting type: DIN rail mounting
EMC data	Electromagnetic compatibility: Conformance with EMC Directive 2014/30/EU Conformance with EMC directives: IEC 61000-6-2 IEC 61000-4-2 (ESD) 6 kV contact discharge, 8 kV air discharge IEC 61000-6-2 IEC 61000-4-3 (immunity to radiated interference) 10 V/m (80 MHz ... 6000 MHz) IEC 61000-6-2 IEC 61000-4-4 (burst) 2 kV power line, 2 kV data line IEC 61000-6-2 IEC 61000-4-5 (surge) power line: 1 kV (line/earth), 0.5 kV (line/line), 1 kV data line IEC 61000-6-2 IEC 61000-4-6 (immunity to conducted interference) 10 V (150 kHz ... 80 MHz) Noise immunity: EN 61000-6-2:2005 Noise emission: EN 61000-6-4
Signaling	Status display: LEDs: US1, US2, FAIL, Link, and Activity