1401466 PHOENIX CONTACT - Technology Bsa

SAC-3P- 1,5-PUR/CI-1L-R-ES - Sensor/actuator cable

Sensor/actuator cable, 3-position, free cable end, on Valve connector CI (9.4mm), with 1 LED, connected with Freewheeling diode with holding current limiting device, cable length: 1.5 m, with holding current limiting device for energy reduction

Cod. Articolo: 1401466

Cod. Fornitore: 1401466

PHOENIX CONTACT

Product properties	Product type: Sensor/actuator cable with valve connector Number of positions: 3 Application: Standard No. of cable outlets: 1 Shielded: no
Material specifications	Seal material: TPU Material housing valve plug: TPU Contact material: CuSn Valve plug contact insert material: PA 6.6 Contact surface material: Ag
Electrical properties	Contact resistance: Ã¢¤ 5 mÃ© Insulation resistance: Ã¢¥ 100 MÃ© Nominal voltage U_N: 24 VDC ±20% Nominal current I_N: 1 A Protective circuit: Freewheeling diode with holding current limiting device Valve connector characteristics Switch-over time: approx. 200 ms (Initial operating time) Clock frequency: approx. 2500 Hz (Holding current limiting device) Switching frequency: max. 5 Hz (Connected valve) Fixing screws: M3 x 25
Signaling	Status display: 1 LED Status display present: Yes
Connector	Connection 1 Type: free cable end Connection 2 Type: Valve connector CI (9.4mm) Number of positions: 3 Material: CuSn (Contact) Ag (Contact surface) PBT (Contact carriers) TPU (Housing)
Cable/line	Cable length: 1.5 m PUR halogen-free black[PUR] Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/4ec2739db2b7a449beeded92db81a494/-S204x204-FJPG Cable weight: 30 kg/km UL AWM Style: 20549 Number of positions: 3 Shielded: no Cable type: PUR halogen-free black[PUR] Conductor structure signal line: 28x 0.15 mm AWG signal line: 20 Conductor cross section: 3x 0.5 mm² Wire diameter incl. insulation: 1.5 mm ±0.05 mm (Signal line) External cable diameter: 4.5 mm ±0.2mm Outer sheath, material: PUR External sheath, color: black-gray RAL 7021 Conductor material: Bare Cu litz wires Material wire insulation: PP Single wire, color: black 1, black 2, green/yellow Overall twist: 3 wires, twisted Max. conductor resistance: 39 Ã©/km (at 20°C) Insulation resistance: min. 20 MÃ©*km Nominal voltage, cable: Ã¢¤ 300 V Test voltage: Ã¢¥ 1200 V Minimum bending radius, fixed installation: 5 x D Minimum bending radius, flexible installation: 10 x D Smallest bending radius, fixed installation: 22.5 mm Smallest bending radius, movable installation: 45 mm Max. bending cycles: 15000000 Halogen-free: in accordance with DINVDE0472 part815 Flame resistance: according to DINVDE0482 According to DINEN50265-2-1 Resistance to oil: in accordance with DIN EN 60811-2-1 Other resistance: largely oil-resistant partly UV-resistant in accordance with DINENISO4892-2-A Ambient temperature (operation): -40°C ... 80°C (cable, fixed installation) -20°C ... 80°C (Cable, flexible installation)
Environmental and real-life conditions	Ambient conditions Degree of protection: IP67 Ambient temperature (operation): -25°C ... 80°C (valve plug)