1403580 PHOENIX CONTACT - Technology Bsa

SACC-M12MSD-4CON-DM 5-8 SH VA - Data connector

Data connector, Ethernet/PROFINET, 4-position, shielded, Plug straight M12, coding: D, Screw connection, knurl material: Stainless steel 1.4404, cable gland M16, external cable diameter 5.5 mm ... 8.6 mm

Cod. Articolo: 1403580

Cod. Fornitore: 1403580

PHOENIX CONTACT

Notes	General: NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g.by using cable ties.
Mounting	Connection method: Screw connection
Product properties	Product type: Circular connector (cable-side) Sensor type: Ethernet/PROFINET Number of positions: 4 No. of cable outlets: 1 Shielded: yes Coding: D Cable outlet: straight Pg screw connection: M16 Insulation characteristics Overvoltage category: II Degree of pollution: 3
Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/fdd89f6f8f030d4b8b02bd1063a35a42/-S204x204-FJPG Length: 62 mm External dimensions Outside diameter: 5.5 mm ... 8.6 mm Housing Diameter housing: 20 mm
Material specifications	Flammability rating according to UL 94: HB Seal material: FKM Material of grip body: Stainless steel 1.4404 Contact material: CuZn Contact surface material: Au Contact carrier material: PA Material for screw connection: Stainless steel 1.4404
Connection data	Conductor connection Connection method: Screw connection Connection cross section: 0.25 mm² ... 0.75 mm² (without ferrule) 0.14 mm² ... 0.75 mm² (with ferrule) 0.25 mm² ... 0.75 mm² (solid) Connection cross section AWG: 24 ... 18 (without ferrule) 26 ... 20 (with ferrule) Stripping length of the individual wire: 5 mm Tightening torque: 0.4 Nm (M12 knurl) 0.2 Nm (Screw terminal blocks) 0.8 Nm ... 1 Nm (Pressure nut with sleeve housing with 4 mm ... 8 mm external cable diameter ) 1 Nm ... 1.4 Nm (Pressure nut with sleeve housing with 8 mm ... 12 mm external cable diameter )
Electrical properties	Rated surge voltage: 2.5 kV Contact resistance: Ã¢¤ 3 mÃ© Insulation resistance: Ã¢¥ 100 MÃ© Nominal voltage U_N: 48 VAC 60 VDC Nominal current I_N: 4 A
Mechanical properties	Mechanical data Insertion/withdrawal cycles: Ã¢¥ 100
Connector	Connection 1 Head design: Plug Head cable outlet: straight Head thread type: M12 Coding: D
Cable/line	Signal type/category: Ethernet/PROFINET Stripping length of the individual wire: 5 mm
Environmental and real-life conditions	Ambient conditions Degree of protection: IP65 IP67 IP69K Ambient temperature (operation): -40°C ... 85°C (Plug / socket)
Standards and regulations	Standard designation: M12 connector Standards/specifications: IEC 61076-2-101