1411488 PHOENIX CONTACT - Technology Bsa

HC-EVO-B10PT-BWD-HL-M25ELC-AL - Connector set

EVO connector set, B10 series, metal housing, consisting of: sleeve housing 1411455, panel mounting base 1411322, EVO screw connection 1411446, pin contact insert 1407730, socket contact insert 1407729

Cod. Articolo: 1411488

Cod. Fornitore: 1411488

PHOENIX CONTACT

Product properties	Type: B10 Product type: Connector set Number of positions: 10 Connection profile: 10+PE No. of cable outlets: 1 Housing type: Complete housing Seal present: yes Protective cover: no Series: HC-B Cable outlet: straight Insulation characteristics Overvoltage category: III Degree of pollution: 3
Electrical properties	Rated voltage (III/3): 500 V Rated surge voltage: 6 kV Rated current: 16 A
Connection data	Connection method: Push-in connection Connection technology: Push-in connection Conductor cross section: 0.14 mm² ... 2.5 mm² (with ferrule) Connection cross section AWG: 26 ... 14 Tightening torque: 0.5 Nm ... 1.7 Nm (Fixing screws for panel mounting base) Stripping length: 8 mm ... 10 mm
Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/be1ceb67f8bdfc42997002a4c0bfab2f/-S204x204-FJPG Width: 53 mm Height: 94.5 mm Length: 93.5 mm Drill hole distance, horizontal: 83 mm Drill hole distance, vertical: 32 mm Installation dimensions Width of the assembly cutout: 35 mm Length of the assembly cutout: 65 mm
Material specifications	Material: Die-cast aluminum, corrosion-resistant PA Flammability rating according to UL 94: V0 Seal material: NBR Contact material: Copper alloy Contact surface material: Ag Contact carrier material: PA Locking latch material: PA Impact strength: IK09
Cable/line	External cable diameter (): 11 mm ... 16 mm
Mechanical properties	Mechanical data Locking type: Latch Insertion/withdrawal cycles: Ã¢¥ 500
Environmental and real-life conditions	Ambient conditions Degree of protection: IP66 IP67 IP66 Enclosure rating (NEMA): 4 (UL50e) 4X (UL50e) 12 (UL50e) Impact strength: IK09 Ambient temperature (operation): -40°C ... 100°C
Mounting	Mounting type: Screw mounting Assembly instructions: Coding also using the CP-HC (1686478) coding profiles. HC-B6../ HC-B10..for two coding profiles. HC-B16../ HC-B24..for four coding profiles. Connectors may only be operated when there is no load/the power is switched off. Can be used for solid wires and stranded wires with ferrule. Connection method: Push-in connection