Non disponibile 
| Notes | General: NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g.by using cable ties. |
| Mounting | Assembly instructions: If the conductor is to be reconnected, it must be cut off above the last contact point. Connection method: Insulation displacement connection |
| Product properties | Product type: Cable connector Sensor type: PROFINET Number of positions: 8 No. of cable outlets: 2 Shielded: yes Insulation characteristics Overvoltage category: III Degree of pollution: 3 |
| Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/1b966ecefe0bce429841613b6949efd2/-S204x204-FJPG Length: 83 mm Wrench size, union nut: 15 mm Wrench size, counter nut: 17 mm External dimensions Outside diameter: 5 mm ... 9.7 mm |
| Connection data | Connection technology Connection method: Insulation displacement connection Frequency of connections between conductors of the same cross section: 10 Conductor connection Conductor cross section flexible: 0.25 mm²0.5 mm² Conductor cross section AWG: 2420 Structure of individual litz in acc. with VDE 0295 / smallest wire diameter: Class 2-6 Tightening torque: 5 Nm (Pressure nut) Wrench size, union nut: 15 mm Wrench size, contact carrier: 17 mm Wire diameter including insulation: 0.75 mm ... 2 mm Pin assignment Contact | Color (signal designation) | Contact (optional): 1 = YE 2 = OG 3 = WH 4 = BU |
| Electrical properties | Rated surge voltage: 0.8 kV Insulation resistance: ⥠100 Mé Nominal voltage UN: 50 VAC 60 VDC Nominal current IN: 0.5 A (30 W) Transmission characteristics (category): CAT6A |
| Material specifications | Flammability rating according to UL 94: V0 Seal material: NBR Material of grip body: Zinc die-cast, nickel-plated Contact material: CuSn Contact surface material: Ni/Au Contact carrier material: PA 6.6 Material for screw connection: Zinc die-cast, nickel-plated Standards/regulations: PA 6.6: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DINEN45545-2 (Risk level HL1 - HL3) Wire insulation material: PVC / PE / PP / rubber |
| Connector | Connection 1 Head design: Cable connectors |
| Cable/line | Signal type/category: PROFINET CAT6A (IEC 11801), 10 Gbps |
| Environmental and real-life conditions | Ambient conditions Degree of protection: IP65 IP67 Ambient temperature (operation): -40°C ... 85°C Ambient temperature (assembly): -5°C ... 50°C |
| Standards and regulations | Testing Standards/regulations: PA 6.6: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DINEN45545-2 (Risk level HL1 - HL3) Standards/specifications: based on IEC 61076-2-109 EN50155:2001 Standard designation: Shock, vibration |
| ECLASS | ECLASS-11.0: 27440102 ECLASS-12.0: 27440116 ECLASS-13.0: 27440116 |
| ETIM | ETIM 9.0: EC002635 |
| UNSPSC | UNSPSC 21.0: 39121400 |
Di seguito alcuni articoli correlati a quello che stai vedendo
