Automazione Industriale

Meccatronica

Sicurezza Industriale

Componenti Quadri

Sensori e Sistemi di Visione

Pneumatica

Network e Comunicazione

Cavi Speciali

Software di progettazione

Accedi ai servizi

Entra nella tua area riservata

Accedi ai servizi

Entra nella tua area riservata

PHOENIX CONTACT 1446170
PHOENIX CONTACT 1446170
PHOENIX CONTACTNon disponibile

PT 2,5-2MTB - Knife-disconnect terminal block

Knife-disconnect terminal block, with two disconnect zones, nom. voltage: 400 V, Thermal continuous current Ith: 16 A, connection method: Push-in connection, Rated cross section: 2.5 mm2, cross section: 0.14 mm2 - 4 mm2, mounting: NS 35/7,5, NS 35/15, color: gray
Cod. Articolo: 1446170
Cod. Fornitore: 1446170
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Caratteristiche Tecniche
Descrizione
Caratteristiche Tecniche
NotesGeneral: with two disconnect zones
Product propertiesProduct type: Disconnect terminal block
Number of positions: 1
Number of connections: 2
Number of rows: 1
Potentials: 2
Data management status
Article revision: 02
Insulation characteristics
Overvoltage category: III
Degree of pollution: 3
Electrical propertiesRated surge voltage: 6 kV
Maximum power dissipation for nominal condition: 0.77 W
Connection dataNumber of connections per level: 2
Nominal cross section: 2.5 mm²
Stripping length: 8 mm ... 10 mm
Internal cylindrical gage: A3
Conductor cross section rigid: 0.14 mm² ... 4 mm²
Cross section AWG: 26 ... 12 (converted acc. to IEC)
Conductor cross section flexible: 0.14 mm² ... 4 mm²
Conductor cross section, flexible [AWG]: 26 ... 12 (converted acc. to IEC)
Conductor cross-section flexible (ferrule without plastic sleeve): 0.14 mm² ... 2.5 mm²
Flexible conductor cross section (ferrule with plastic sleeve): 0.14 mm² ... 2.5 mm²
Thermal continuous current Ith: 16 A (with 1.5 mm² conductor cross section)
17.5 A (with a 2.5 mm² conductor cross section)
Maximum load current: 17.5 A (with 4 mm² conductor cross-section)
Nominal voltage: 400 V
Connection cross sections directly pluggable
Conductor cross section rigid: 0.34 mm² ... 4 mm²
Conductor cross section, rigid [AWG]: 22 ... 12 (converted acc. to IEC)
Conductor cross-section flexible (ferrule without plastic sleeve): 0.5 mm² ... 2.5 mm²
Flexible conductor cross section (ferrule with plastic sleeve): 0.34 mm² ... 2.5 mm²
Conductor cross section flexible, with TWIN ferrule with plastic sleeve: 0.5 mm² ... 0.5 mm²
DimensionsWidth: 5.2 mm
Height: 94.3 mm
Depth: 36.9 mm
Material specificationsColor: gray (RAL 7042)
Flammability rating according to UL 94: V0
Insulating material group: I
Insulating material: PA
Static insulating material application in cold: -60 °C
Relative insulation material temperature index (Elec., UL 746 B): 130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22: HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23: HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24: HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26: HL 1 - HL 3
Surface flammability NFPA 130 (ASTM E 162): passed
Specific optical density of smoke NFPA 130 (ASTM E 662): passed
Smoke gas toxicity NFPA 130 (SMP 800C): passed
Electrical testsSurge voltage test
Test voltage setpoint: 7.3 kV
Result: Test passed
Temperature-rise test
Requirement temperature-rise test: Increase in temperature ≤ 45 K
Result: Test passed
Short-time withstand current 2.5 mm²: 0.3 kA
Power-frequency withstand voltage
Test voltage setpoint: 1.89 kV
Result: Test passed
Mechanical propertiesMechanical data
Open side panel: Yes
Mechanical testsMechanical strength
Result: Test passed
Attachment on the carrier
DIN rail/fixing support: NS 35
Result: Test passed
Test for conductor damage and slackening
Rotation speed: 9 rpm
Revolutions: 135
Conductor cross section/weight: 0.14 mm² / 0.2 kg
2.5 mm² / 0.7 kg
4 mm² / 0.9 kg
Result: Test passed
Environmental and real-life conditionsAging
Temperature cycles: 192
Result: Test passed
Needle-flame test
Time of exposure: 30 s
Result: Test passed
Oscillation/broadband noise
Specification: DIN EN 50155 (VDE 0115-200):2022-06
Spectrum: Service life test category 1, class B, body mounted
Frequency: f1 = 5 Hz to f2 = 150 Hz
ASD level: 0.964 (m/s²)²/Hz
Acceleration: 0.58g
Test duration per axis: 5 h
Test directions: X-, Y- and Z-axis
Result: Test passed
Shocks
Specification: DIN EN 50155 (VDE 0115-200):2022-06
Pulse shape: Half-sine
Acceleration: 5g
Shock duration: 30 ms
Number of shocks per direction: 3
Test directions: X-, Y- and Z-axis (pos. and neg.)
Result: Test passed
Ambient conditions
Ambient temperature (operation): -60 °C ... 110 °C (Operating temperature range incl. self-heating; for max. short-term operating temperature, see RTI Elec.)
Ambient temperature (storage/transport): -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly): -5 °C ... 70 °C
Ambient temperature (actuation): -5 °C ... 70 °C
Permissible humidity (operation): 20 % ... 90 %
Permissible humidity (storage/transport): 30 % ... 70 %
MountingMounting type: NS 35/7,5
NS 35/15
Descrizione
PT 2,5-2MT Mors. sez. coltello