Automazione Industriale

Meccatronica

Sicurezza Industriale

Componenti Quadri

Sensori e Sistemi di Visione

Pneumatica

Network e Comunicazione

Cavi Speciali

Software di progettazione

Accedi ai servizi

Entra nella tua area riservata

Accedi ai servizi

Entra nella tua area riservata

PHOENIX CONTACT 1464483
PHOENIX CONTACTNon disponibile

PTCB E1 24DC/0.1A SI-R - Electronic circuit breaker

Single-channel, electronic device protection for 12-24VDC loads. Fixed nominal current value: 0.1A. With remote signaling, remote reset, and active current limitation. Can be combined with CLIPLINE terminal blocks. For installation on DIN rails.
Cod. Articolo: 1464483
Cod. Fornitore: 1464483
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Caratteristiche Tecniche
Specifiche
Download
Caratteristiche Tecniche
NotesGeneral
Note: Connection for signal line tested in accordance with EN61000-4-4 with 1 kV; if necessary, customer must provide appropriate protective measures
Repeated hard short circuits can reduce the melting integral of the integrated backup fuse.
Product propertiesType: DIN rail module, one-piece
Product type: Device circuit breakers
Product family: PTCB
Number of positions: 1
No. of channels: 1
Insulation characteristics
Protection class: III
Pollution degree: 2
Electrical propertiesNo. of channels: 1
General
Operating voltage: 10 VDC ... 30 VDC
Rated voltage: 24 VDC
Rated current IN: 15 ADC (Total current input)
0.1 ADC (Rated current output)
0.1ADC
Rated current (pre-adjusted): 0.1 A
Rated surge voltage: 0.5 kV
Tripping method: E (electronic)
Feedback resistance: max. 35 VDC
Required backup fuse: Only required if Imax of the power supply > the short-circuit switching capacity. Integrated failsafe element.
Short-circuit switching capacity: 300 A
Dielectric strength: max. 35 VDC (Load circuit)
Active current limitation: typ. 1,2 x IN
Fuse: electronic
Efficiency: > 98.5 %
Closed circuit current I0: typ. 3.8 mA
Power dissipation: typ. 0.1 W (No-load operation)
< 0.7 W (Nominal operation)
Module initialization time: 40 ms
Waiting time after switch off of a channel: 5 s (at overload / short circuit)
Measuring tolerance I: ± 17 %
Temperature derating: 15 A (Total current at 60°C)
20 A (Total current at 50°C)
MTBF (IEC 61709, SN 29500): 28256569 h (at 25°C with 21% load)
13821700 h (at40°C with 34.25%load)
2639079 h (at60°C with 100%load)
Voltage drop: 0.058 V (at 0.1 A)
Fail-safe element: 4 ADC
Load circuit
Shutdown time: ≤ 600 ms
≥ 520 ms (depending on the available load)
Shutdown, typical, 1.2 x IN
Undervoltage switch-off: ≤ 9.2 VDC (active)
≥ 10.2 VDC (inactive)
Overvoltage switch-off: ≥ 30.5 VDC (active)
≤ 29.5 VDC (inactive)
Max. capacitive load: 2.35 mF (Depending on the current setting and the short-circuit current available)
Reset
Input voltage range: 7 VDC ... 30 VDC (Reset with falling edge)
Current consumption: typ. 0.4 mA (at 24 V DC)
Pulse length: ≥ 50 ms (High)
≥ 50 ms (Low)
Voltage: < 5 VDC (Low state)
> 8 VDC (High state)
Stripping length: 8 mm
Conductor cross section rigid: 0.2 mm² ... 2.5 mm²
Conductor cross section AWG: 24 ... 12
Conductor cross section, flexible, with ferrule, with plastic sleeve: 0.25 mm² ... 2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve: 0.25 mm² ... 2.5 mm²
Status output
Output voltage: 24 VDC (Error)
0 VDC (no error)
Output current: max. 0.015 A (Short-circuit-proof)
Stripping length: 8 mm
Conductor cross section rigid: 0.2 mm² ... 4 mm²
Conductor cross section AWG: 24 ... 12
Conductor cross section, flexible, with ferrule, with plastic sleeve: 0.25 mm² ... 2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve: 0.25 mm² ... 2.5 mm²
Connection dataMain circuit IN+
Connection method: Push-in connection
Stripping length: 8 mm
Conductor cross section flexible: 0.2 mm² ... 2.5 mm²
Conductor cross section rigid: 0.2 mm² ... 4 mm²
Conductor cross section AWG: 24 ... 12
Conductor cross section, flexible, with ferrule, with plastic sleeve: 0.2 mm² ... 2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve: 0.2 mm² ... 2.5 mm²
Main circuit IN-
Connection method: Push-in connection
Stripping length: 8 mm
Conductor cross section flexible: 0.2 mm² ... 2.5 mm²
Conductor cross section rigid: 0.2 mm² ... 4 mm²
Conductor cross section AWG: 24 ... 12
Conductor cross section, flexible, with ferrule, with plastic sleeve: 0.2 mm² ... 2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve: 0.2 mm² ... 2.5 mm²
Main circuit OUT
Connection method: Push-in connection
Stripping length: 8 mm
Conductor cross section flexible: 0.2 mm² ... 2.5 mm²
Conductor cross section rigid: 0.2 mm² ... 4 mm²
Conductor cross section AWG: 24 ... 12
Conductor cross section, flexible, with ferrule, with plastic sleeve: 0.2 mm² ... 2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve: 0.2 mm² ... 2.5 mm²
SignalingChannel LED off: off (Channel switched off)
Channel LED yellow: flashing (Programming mode active)
Channel LED green: lit (Channel switched on)
Channel LED red: lit (Channel switched off, over- or undervoltage active)
ON temporarily (Channel switched off, 5s cool-down phase, overload or short-circuit release)
flashing (Channel switched off, ready to be switched back on, overload or short-circuit release)
flashing quickly (Channel switched off, external voltage at the output, possible installation error)
DimensionsDimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/91339568b73b714292afb2d2f0fc1b11/-S204x204-FJPG
Width: 6.2 mm
Height: 105.8 mm
Depth: 55.6 mm (incl. DIN rail 7.5mm)
Material specificationsMaterial: PBT
Flammability rating according to UL 94: V-0
Environmental and real-life conditionsAmbient conditions
Degree of protection: IP20
Ambient temperature (operation): -30°C ... 60°C
Ambient temperature (storage/transport): -40°C ... 70°C
Altitude: ≤ 3000 m up to52°C (amsl)
≤ 4000 m up to46°C (amsl)
Humidity test: 96h, 95%RH, 40°C
Shock (operation): 30g (IEC 60068-2-27, Test Ea)
Vibration (operation): 10Hz...59.6Hz (Amplitude±0.35mm; in accordance with IEC 60068-2-6, Test Fc)
59.6Hz…150Hz (Acceleration5g; in accordance with IEC 60068-2-6, Test Fc)
5Hz…100Hz (Resonance search4g; resonance frequency4g; 90minin accordance with DNV GL Class B)
ApprovalsUL approval
Identification: UL/C-UL Listed UL 508
UL Recognized UL 2367
NEC Class 2 according to UL 1310
UL/C-UL Listed ANSI/UL 121201 Class I, Division 2, Groups A, B, C, D (Hazardous Location)
DNV GL
Identification: Shipbuilding approval
DNV GL data
Temperature: A
Humidity: B
Vibration: B
EMC: A
Enclosure: A
Standards and regulationsStandards/specifications: EN61000-6-2
EN61000-6-3
EN60068-2-78
EN50178
EN60068-2-6
EN60068-2-27
EN60068-2-30
Note: EMC – Immunity for industrial areas
EMC – Emission for residential, business and commercial properties and small operations
Environmental influences – Moisture and heat, constant
Equipping power installations with electronic equipment
Environmental influences – Vibrations (sinusoidal)
Environmental influences – Shocks
Environmental influences – Part 2–30: Tests – Test Db: Damp heat, cyclical
MountingMounting type: DIN rail: 35 mm
Specifiche
ECLASSECLASS-11.0: 27140401
ECLASS-12.0: 27140401
ECLASS-13.0: 27140401
ETIMETIM 9.0: EC003538
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Approvals_01634.pdf

Approvals_01635.pdf

Approvals_01636.pdf

Approvals_01637.pdf

Approvals_01639.pdf

Approvals_01747.pdf

Flyer_00006.pdf

Manufacturer_declaration_01040.pdf

Manufacturer_declaration_01300.pdf

Manufacturer_declaration_02245.pdf

Manufacturer_declaration_08998.pdf

Package_slip_00229.pdf

Product_information_00033.pdf

Product_information_00149.pdf

Technical_drawing_15871.pdf

Various_00001.pdf