1533699 PHOENIX CONTACT - Technology Bsa

SACC-M12FSB-5CON-PG 9 - Data connector

Data connector, 5-position, Socket straight M12, coding: B, Screw connection, knurl material: Plastic, cable gland Pg9, external cable diameter 6 mm ... 8 mm

Cod. Articolo: 1533699

Cod. Fornitore: 1533699

PHOENIX CONTACT

Notes	General: NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g.by using cable ties.
Mounting	Connection method: Screw connection
Product properties	Product type: Circular connector (cable-side) Number of positions: 5 No. of cable outlets: 1 Shielded: no Coding: B Cable outlet: straight Pg screw connection: Pg9 Insulation characteristics Overvoltage category: II Degree of pollution: 3
Dimensions	External dimensions Outside diameter: 6 mm ... 8 mm
Material specifications	Flammability rating according to UL 94: HB Seal material: NBR Material of grip body: PA Contact material: CuZn Contact surface material: CuSnZn Contact carrier material: PA Material for screw connection: Plastic
Connection data	Conductor connection Connection method: Screw connection Connection cross section: 0.25 mm² ... 0.75 mm² Connection cross section AWG: 24 ... 18 Stripping length of the individual wire: 5 mm Tightening torque: 0.4 Nm (M12 knurl) 0.2 Nm (Screw terminal blocks) 0.8 Nm ... 1 Nm (Pressure screw with sleeve housing)
Electrical properties	Contact resistance: Ã¢¤ 8 mÃ© Insulation resistance: Ã¢¥ 100 MÃ© Nominal voltage U_N: 60 VDC 48 VAC Nominal current I_N: 4 A
Mechanical properties	Mechanical data Insertion/withdrawal cycles: Ã¢¥ 50
Connector	Connection 1 Head design: Socket Head cable outlet: straight Head thread type: M12 Coding: B
Cable/line	Stripping length of the individual wire: 5 mm
Environmental and real-life conditions	Ambient conditions Degree of protection: IP67 Ambient temperature (operation): -40°C ... 85°C (Plug / socket)
Standards and regulations	Standard designation: M12 connector Standards/specifications: IEC 61076-2-101