Automazione Industriale

Meccatronica

Sicurezza Industriale

Componenti Quadri

Sensori e Sistemi di Visione

Pneumatica

Network e Comunicazione

Cavi Speciali

Software di progettazione

Accedi ai servizi

Entra nella tua area riservata

Accedi ai servizi

Entra nella tua area riservata

PHOENIX CONTACT 1546657
PHOENIX CONTACTNon disponibile

SAC-4P-M12MS/ 3,0-150/M12FS - Sensor/actuator cable

Sensor/actuator cable, 4-position, Plug straight M12, coding: A, connected with unwired, on Socket straight M12, coding: A, cable length: 3 m
Cod. Articolo: 1546657
Cod. Fornitore: 1546657
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Caratteristiche Tecniche
Specifiche
Download
Caratteristiche Tecniche
Product propertiesProduct type: Sensor/actuator cable
Number of positions: 4
Application: Standard
No. of cable outlets: 1
Shielded: no
Coding: A
Insulation characteristics
Overvoltage category: II
Degree of pollution: 3
Material specificationsFlammability rating according to UL 94: HB
Seal material: NBR
Material of grip body: TPU, hardly inflammable, self-extinguishing
Contact material: CuSn
Contact surface material: Ni/Au
Contact carrier material: TPU GF
Material for screw connection: Zinc die-cast, nickel-plated
Electrical propertiesContact resistance: ≤ 5 mΩ
Insulation resistance: ≥ 100 MΩ
Nominal voltage UN: 250 VAC
250 VDC
Nominal current IN: 4 A
Protective circuit: unwired
Mechanical propertiesMechanical data
Insertion/withdrawal cycles: ≥ 100
SignalingStatus display: No
Status display present: No
Connection dataConductor connection
Tightening torque: 0.4 Nm
ConnectorConnection 1
Type: Plug straight M12
Number of positions: 4
Coding type: A
Connection 2
Type: Socket straight M12
Number of positions: 4
Coding type: A
Cable/lineCable length: 3 m
PUR irradiated halogen-free orange[150]
Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/e85bae26a59b7148a7cb1d536b90a318/-S204x204-FJPG
Number of positions: 4
Shielded: no
Cable type: PUR irradiated halogen-free orange[150]
Conductor structure signal line: 19x 0.15 mm
AWG signal line: 22
Conductor cross section: 4x 0.34 mm² (Signal line)
Wire diameter incl. insulation: 1.05 mm ±0.05 mm (Signal line)
External cable diameter: 5.2 mm ±0.2mm
Outer sheath, material: PUR
External sheath, color: orange RAL2003
Conductor material: Bare Cu litz wires
Material wire insulation: PE
Single wire, color: brown, white, blue, black
Overall twist: 4 wires, twisted
Length of twist, overall twist: 27 mm
Max. conductor resistance: max. 57 Ω/km
Nominal voltage, cable: 320 V (AC)
Test voltage: 2500 V (50 Hz, 5 minutes)
Smallest bending radius, fixed installation: min. 15 mm
Smallest bending radius, movable installation: min. 30 mm
Max. bending cycles: 5000000
Torsion force: ± 360°/m
Halogen-free: The cable is halogen-free
Other resistance: hydrolysis and microbe resistant
Resistant to welding splashes
Special properties: Silicone-free
Irradiated
Ambient temperature (operation): -50°C ... 105°C (cable, fixed installation)
-40°C ... 105°C (Cable, flexible installation)
Environmental and real-life conditionsAmbient conditions
Degree of protection: IP65
IP67
IP68
Ambient temperature (operation): -25°C ... 90°C (Plug / socket)
-50°C ... 105°C (cable, fixed installation)
-40°C ... 105°C (Cable, flexible installation)
Specifiche
ECLASSECLASS-11.0: 27060311
ECLASS-12.0: 27060311
ECLASS-13.0: 27060311
ETIMETIM 8.0: EC001855
UNSPSCUNSPSC 21.0: 26121600
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Manufacturer_declaration_00220.pdf

Manufacturer_declaration_02452.pdf

Manufacturer_declaration_04567.pdf

Manufacturer_declaration_05518.pdf