Non disponibile

CA-06P1N8AHZ00 - Device connector, rear mounting

M23, Device connector, rear mounting, series: CA, straight, shielded: yes, for standard and SPEEDCON interlock, No. of pos.: 6, Direction of rotation: Standard, contact connection type: Pin, Crimp connection, Axial seal, Central fixing, coding: N, Alternative product in accordance with RoHS II without Exemption6c (Pb<0.1%) item no.: 1243851

Cod. Articolo: 1619848

Cod. Fornitore: 1619848

PHOENIX CONTACT

Caratteristiche Tecniche

Specifiche

Descrizione

Download

Caratteristiche Tecniche

Notes	General: Order crimp contacts 6 x Ã 2 mm separately
Product properties	Product type: Circular connectors (device side)
Connector	Insulating body Note: Order information: Order crimp contacts 6 x Ã 2 mm separately Coding: N Insulation body material: PA 6.6 Connection method: Crimp connection Contact switching type: Pin Application: Signal Number of positions: 6 Direction of rotation: Standard Connection profile: 6 Contact diameter Signal contacts: 2 mm Litz wire cross-section Signal contacts min.: 1 mm² Litz wire cross-section Signal contacts max.: 2.5 mm² Nominal current per signal contact: 20 A Rated voltage Signal contact: 48 VAC Rated surge voltage: 1.5 kV Overvoltage category: III Degree of pollution: 3 Housing Housing material: Turned parts: copper zinc alloy (CuZn), die-cast parts: zinc (GD-Zn) Type of locking: for standard and SPEEDCON interlock Pg screw connection: none Degree of protection (plugged in): IP67 Thread type: M23
Environmental and real-life conditions	Ambient conditions Ambient temperature (operation): -40°C ... 125°C

Specifiche

ECLASS	ECLASS-11.0: 27440102 ECLASS-12.0: 27440116 ECLASS-13.0: 27440116
ETIM	ETIM 9.0: EC002635
UNSPSC	UNSPSC 21.0: 39121400

Descrizione

Device connector for rear wall, CA, straight, shielded: yes, for standard and SPEEDCON interlock, M23, No. of pos.: 6, type of contact: Pin, Crimp connection, Axial seal, Central fixing

Download

PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Assembly_instructions_00056.pdf

Manufacturer_declaration_05486.pdf

Manufacturer_declaration_12002.pdf

Technical_drawing_17376.pdf