Automazione Industriale

Meccatronica

Sicurezza Industriale

Componenti Quadri

Sensori e Sistemi di Visione

Pneumatica

Network e Comunicazione

Cavi Speciali

Software di progettazione

Accedi ai servizi

Entra nella tua area riservata

Accedi ai servizi

Entra nella tua area riservata

PHOENIX CONTACT 1640731
PHOENIX CONTACTNon disponibile

Q 1,5/3A50/13-M20KU-ESA - Panel feed-through

QUICKON panel feed-through, for the front wall assembly with 50 cm long wires, 3-pos.
Cod. Articolo: 1640731
Cod. Fornitore: 1640731
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Caratteristiche Tecniche
Specifiche
Download
Caratteristiche Tecniche
Product propertiesProduct type: Panel feed-through
Number of positions: 3
Position marking: 1, 2, 3
Number of connections: 3
Number of connections per position: 1
Shielded: no
Insulation characteristics
Overvoltage category: III
Degree of pollution: 3
Connection dataConnection technology
Connection technology: QUICKON connection
Connection system, internal: Individual wires
Frequency of connections between conductors of the same cross section: 10 (if the conductor is connected more than once, seal and cap may need to be replaced.)
Conductor connection
Conductor cross section flexibel: 0.75 mm² ... 1.5 mm²
Conductor cross section solid: 0.75 mm² ... 1 mm²
Connection cross section AWG: 18 ... 16
Tightening torque Union nut: 2.5 Nm
Tightening torque Contact carrier: 3.75 Nm
Tightening torque Locking nut: 3.75 Nm
Wrench size Union nut: 24 mm
Wrench size Contact carrier: 24 mm
Pin assignment
Contact | Color (signal designation) | Contact (optional): 1 | BN
2 | WH
3 | BU
DimensionsDimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/d1ea8ea4213fba40835fb98476cda3b9/-S204x204-FJPG
Width: 24 mm
Height: 24 mm
Length: 42.7 mm
Electrical propertiesRated surge voltage (III/3): 6 kV
Contact resistance: < 3 mΩ
rated voltage (II/2): 630 V (with insulating sleeve)
rated voltage (III/2): 320 V (with insulating sleeve)
Rated voltage (III/3): 250 V (with insulating sleeve)
Nominal voltage UN: 250 VAC
250 VDC
Nominal current IN: 17.5 A
Material specificationsMaterial: PA
Flammability rating according to UL 94: V0
Material wire insulation: PVC / PE
Contact material: Copper alloy
Contact surface material: Pre-nickel plated and tin-plated
Contact carrier material: PA 6.6
Cable/lineCable length: 0.5 m
Structure of individual litz in acc. with VDE 0295 / smallest wire diameter: VDE 0295 Cl.2-5, min. wire diameter 0.2 mm
Wire diameter including insulation: >= 3 mm
Position marking: 1, 2, 3
Cable cross section: 1.5 mm²
MountingMounting type: Front mounting M20
Assembly instructions: If the conductor is reconnected, it must be cut off above the last contact point. QUICKON components may only be operated when under no load.
Connection method: Single wires
Environmental and real-life conditionsAmbient conditions
Degree of protection: IP65
IP67
Ambient temperature (operation): -25°C ... 80°C (Specifications of the cable manufacturer must be observed.)
-25°C ... 50°C (when the conductor is connected. Specifications of the cable manufacturer must also be observed.)
Temperature when conductor connected: -5°C ... 50°C
Specifiche
ECLASSECLASS-11.0: 27440602
ECLASS-13.0: 27440602
ECLASS-12.0: 27440602
ETIMETIM 9.0: EC002566
UNSPSCUNSPSC 21.0: 39121500
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Approvals_00231.pdf

Manufacturer_declaration_00148.pdf

Manufacturer_declaration_02472.pdf

Manufacturer_declaration_05522.pdf

Package_slip_00205.pdf