Non disponibile 
| Product properties | Product type: Panel feed-through Number of positions: 2 Position marking: 1, 2 Number of connections per position: 1 Shielded: no Insulation characteristics Overvoltage category: III Degree of pollution: 3 |
| Connection data | Connection technology Connection technology: QUICKON connection Connection system, internal: Dip-solder connection The product must be screwed to the PCB before soldering. Self-tapping screws in acc. with ISO 1481-ST 2,9 x 6,5 C. Frequency of connections between conductors of the same cross section: 10 (if the conductor is connected more than once, seal and cap may need to be replaced.) Conductor connection Conductor cross section flexibel: 0.75 mm² ... 1.5 mm² Conductor cross section solid: 0.75 mm² ... 1 mm² Connection cross section AWG: 18 ... 16 Tightening torque Union nut: 2.5 Nm Tightening torque Contact carrier: 3.75 Nm Tightening torque Locking nut: 3.75 Nm Wrench size Union nut: 22 mm Wrench size Contact carrier: 22 mm |
| Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/85e07d2586c33942856cd1713f0b0f0b/-S204x204-FJPG Width: 34.3 mm Height: 22.5 mm Length: 42.3 mm |
| Electrical properties | Rated surge voltage (III/3): 6 kV Contact resistance: < 3 mé rated voltage (II/2): 630 V rated voltage (III/2): 320 V Rated voltage (III/3): 250 V Nominal voltage UN: 250 VAC 250 VDC Nominal current IN: 17.5 A |
| Material specifications | Material: PA Flammability rating according to UL 94: V0 Material wire insulation: PVC / PE Contact material: Copper alloy Contact surface material: Pre-nickel plated and tin-plated Contact carrier material: PA 6.6 |
| Cable/line | Structure of individual litz in acc. with VDE 0295 / smallest wire diameter: VDE 0295 Cl.2-5, min. wire diameter 0.2 mm Wire diameter including insulation: >= 3 mm Position marking: 1, 2 |
| Mounting | Mounting type: Front mounting Pg11 Assembly instructions: If the conductor is reconnected, it must be cut off above the last contact point. QUICKON components may only be operated when under no load. Connection method: Dip-solder connection |
| Environmental and real-life conditions | Ambient conditions Degree of protection: IP65 IP67 Ambient temperature (operation): -25°C ... 80°C -25°C ... 50°C (when the conductor is connected. Specifications of the cable manufacturer must also be observed.) Temperature when conductor connected: -5°C ... 50°C |
| ECLASS | ECLASS-11.0: 27440602 ECLASS-13.0: 27440602 ECLASS-12.0: 27440602 |
| ETIM | ETIM 9.0: EC002566 |
| UNSPSC | UNSPSC 21.0: 39121500 |
Di seguito alcuni articoli correlati a quello che stai vedendo
