Non disponibile 
| Product properties | Product type: Panel feed-through Number of positions: 4 Position marking: 1, 2, 3, 4 Number of connections: 4 Number of connections per position: 1 Shielded: no Insulation characteristics Overvoltage category: III Degree of pollution: 3 |
| Connection data | Connection technology Connection technology: QUICKON connection Connection system, internal: Manual solder/slip on connection Frequency of connections between conductors of the same cross section: 10 (if the conductor is connected more than once, seal and cap may need to be replaced.) Conductor connection Conductor cross section flexibel: 0.34 mm² ... 0.75 mm² Conductor cross section solid: 0.34 mm² ... 0.75 mm² Connection cross section AWG: 18 ... 16 Tightening torque Union nut: 2.5 Nm Tightening torque Contact carrier: 3.75 Nm Tightening torque Locking nut: 3.75 Nm Wrench size Union nut: 22 mm Wrench size Contact carrier: 22 mm |
| Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/718e8c419fe13f4a87bbb41d85c84d9a/-S204x204-FJPG Width: 22 mm Height: 22 mm Length: 42.3 mm |
| Electrical properties | Rated surge voltage (III/3): 4 kV Contact resistance: < 3 mé rated voltage (II/2): 320 V (with insulating sleeve) rated voltage (III/2): 160 V (with insulating sleeve) Rated voltage (III/3): 160 V (with insulating sleeve) Nominal voltage UN: 160 VAC 160 VDC Nominal current IN: 9 A |
| Material specifications | Material: PA Cu alloy Flammability rating according to UL 94: V0 Material wire insulation: PVC / PE Contact surface material: Pre-nickel plated and tin-plated |
| Cable/line | Structure of individual litz in acc. with VDE 0295 / smallest wire diameter: Class 2-6 // 0.34 mm²: 0.1 mm; 0.5 - 0.75 mm²: 0.15 mm Wire diameter including insulation: 2.5 mm Position marking: 1, 2, 3, 4 |
| Mounting | Mounting type: Front mounting Pg11 Assembly instructions: If the conductor is reconnected, it must be cut off above the last contact point. QUICKON components may only be operated when under no load. Connection method: Spade connection |
| Environmental and real-life conditions | Ambient conditions Degree of protection: IP65 IP67 Ambient temperature (operation): -25°C ... 80°C (Specifications of the cable manufacturer must be observed.) -25°C ... 50°C (when the conductor is connected. Specifications of the cable manufacturer must also be observed.) Temperature when conductor connected: -5°C ... 50°C |
| ECLASS | ECLASS-11.0: 27440602 ECLASS-12.0: 27440602 ECLASS-13.0: 27440602 |
| ETIM | ETIM 9.0: EC002566 |
| UNSPSC | UNSPSC 21.0: 39121500 |
Di seguito alcuni articoli correlati a quello che stai vedendo
