Automazione Industriale

Meccatronica

Sicurezza Industriale

Componenti Quadri

Sensori e Sistemi di Visione

Pneumatica

Network e Comunicazione

Cavi Speciali

Software di progettazione

Accedi ai servizi

Entra nella tua area riservata

Accedi ai servizi

Entra nella tua area riservata

PHOENIX CONTACT 1688825
PHOENIX CONTACTNon disponibile

VS-PSC 1,5/5-M - Contact insert

POWER-SUBCON header, for mounting side, 5-pos., shielded, green, for wall thicknesses up to 2.0 or 4.5mm, with spacer pin SW 5L5/4-40 UNC-M 3 x 8
Cod. Articolo: 1688825
Cod. Fornitore: 1688825
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Caratteristiche Tecniche
Specifiche
Descrizione
Download
Caratteristiche Tecniche
NotesGeneral: Only actuate MINI COMBICON connectors when under no load condition. If for operating reasons small loads must be switched, experimental values are available upon request.
Product propertiesType: D-SUB
Male
Product type: Male insert
Number of positions: 5
Insulation characteristics
Overvoltage category: III
Degree of pollution: 3
Electrical propertiesRated voltage (III/3): 250 V
Rated surge voltage: 4 kV
Rated current: 8 A
Contact resistance: 3 mΩ
Insulation resistance: 1 TΩ
Transmission medium: Copper
DimensionsDimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/a12f8b6c50597244880f4773776d3e81/-S204x204-FJPG
Width: 39.1 mm
Height: 13.7 mm
Length: 20.8 mm
Material specificationsFlammability rating according to UL 94: V0
Contact material: Copper alloy
Contact surface material: tin-plated
Contact carrier material: PA
Mechanical propertiesMechanical data
Insertion/withdrawal cycles: ≥ 100
Environmental and real-life conditionsAmbient conditions
Degree of protection: IP20
Ambient temperature (operation): -20°C ... 80°C
MountingMounting type: Threads
Connection method: PCB connection
Specifiche
ECLASSECLASS-11.0: 27440223
ECLASS-12.0: 27440223
ECLASS-13.0: 27440223
ETIMETIM 9.0: EC003557
UNSPSCUNSPSC 21.0: 39121400
Descrizione
POWER-SUBCON header, for mounting side, 5-pos., shielded, green, for wall thicknesses up to 2.0 or 4.5 mm, with spacer pin SW 5L5/4-40 UNC-M 3 x 8
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Manufacturer_declaration_05459.pdf

Technical_drawing_18395.pdf