Automazione Industriale

Meccatronica

Sicurezza Industriale

Componenti Quadri

Sensori e Sistemi di Visione

Pneumatica

Network e Comunicazione

Cavi Speciali

Software di progettazione

Accedi ai servizi

Entra nella tua area riservata

Accedi ai servizi

Entra nella tua area riservata

PHOENIX CONTACT 2688394
PHOENIX CONTACTNon disponibile

AXL F BK EIP - Bus coupler

AxiolineF, Bus coupler, EtherNet/IP™, RJ45 jack, transmission speed in the local bus:100 Mbps, degree of protection: IP20, including bus base module and AxiolineF connector
Cod. Articolo: 2688394
Cod. Fornitore: 2688394
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Caratteristiche Tecniche
Specifiche
Descrizione
Download
Caratteristiche Tecniche
DimensionsDimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/aad81a7f06bc4f4aa1cf74b52bb32fb4/-S204x204-FJPG
Width: 45 mm
Height: 126.1 mm
Depth: 74 mm
Note on dimensions: The depth applies when a TH35-7.5 DIN rail is used (in accordance with EN60715).
InterfacesEtherNet/IP™
Number of interfaces: 2
Connection method: RJ45 jack
Note on the connection method: Auto negotiation and autocrossing
Transmission speed: 10/100 Mbps (Half or full duplex mode (automatic detection, can be adjusted manually))
Transmission physics: Ethernet in RJ45 twisted pair
AxiolineFlocal bus
Number of interfaces: 1
Connection method: Bus base module
Transmission speed: 100 Mbps
Service
Number of interfaces: 1
Connection method: USB type C (from HW 05)
Micro USB type B (up to HW 04)
System propertiesSystem limits
Number of supported devices: max. 63 (per station)
Number of local bus devices that can be connected: max. 63
Product propertiesType: block modular
Product type: I/O component
Product family: AxiolineF
Mounting position: any (observe temperature derating)
Scope of delivery: including bus base module and AxiolineF connector
Insulation characteristics
Overvoltage category: II (IEC 60664-1, EN60664-1)
Pollution degree: 2 (IEC 60664-1, EN60664-1)
Electrical propertiesPotentials: Communications power U
Supply voltage: 24 VDC
Supply voltage range: 19.2 VDC ... 30 VDC (including all tolerances, including ripple)
Current draw: max. 583 mA (2.0A at UBus, UL=24V, up to HW04)
max. 670 mA (2.5A at UBus, UL=24V, from HW05)
Power consumption: max. 14 W (2.0A at UBus, UL=24V, up to HW04)
max. 16 W (2.5A at UBus, UL=24V, from HW05)
Protective circuit: Surge protection; electronic
Reverse polarity protection; electronic
Potentials: AxiolineF local bus supply (U
Supply voltage: 5 VDC (via bus base module)
Power supply unit: max. 2 A (up to HW 04)
max. 2.5 A (from HW 05)
Electrical isolation/isolation of the voltage ranges
Test voltage: Ethernet interface 1 / Ethernet interface 2: 1500 VAC, 50 Hz, 1 min.
Test voltage: Ethernet interface 1 / 24 V communications voltage (UL) feed-in: 1500 VAC, 50 Hz, 1 min.
Test voltage: Ethernet interface 2 / 24 V communications voltage (UL) feed-in: 1500 VAC, 50 Hz, 1 min.
Test voltage: Ethernet interface 1 / functional ground: 1500 VAC, 50 Hz, 1 min.
Test voltage: Ethernet interface 2 / functional ground: 1500 VAC, 50 Hz, 1 min.
Test voltage: 24 V communications voltage (UL) feed-in / functional ground: 500 VAC, 50 Hz, 1 min.
Connection dataConnection technology
Connection name: AxiolineF connector
Note on the connection method: Please observe the information provided on conductor cross sections in the “AxiolineF: system and installation†user manual.
Conductor connection
Connection method: Push-in connection
Conductor cross section rigid: 0.2 mm² ... 1.5 mm²
Conductor cross section flexible: 0.2 mm² ... 1.5 mm²
Conductor cross section AWG: 24 ... 16
Stripping length: 8 mm
AxiolineF connector
Connection method: Push-in connection
Note on the connection method: Please observe the information provided on conductor cross sections in the “AxiolineF: system and installation†user manual.
Conductor cross section, rigid: 0.2 mm² ... 1.5 mm²
Conductor cross section, flexible: 0.2 mm² ... 1.5 mm²
Conductor cross section AWG: 24 ... 16
Stripping length: 8 mm
Environmental and real-life conditionsAmbient conditions
Ambient temperature (operation): -25°C ... 60°C (Mounting position: wall mounting on horizontal DIN rail)
-25°C ... 55°C (Mounting position: any)
Degree of protection: IP20
Air pressure (operation): 70 kPa ... 106 kPa (up to 3000m above sea level)
Air pressure (storage/transport): 70 kPa ... 106 kPa (up to 3000m above sea level)
Ambient temperature (storage/transport): -40°C ... 85°C
Permissible humidity (operation): 5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport): 5 % ... 95 % (non-condensing)
Standards and regulationsProtection class: III (IEC 61140, EN61140, VDE0140-1)
MountingMounting type: DIN rail mounting
Mounting position: any (observe temperature derating)
Specifiche
ECLASSECLASS-11.0: 27242608
ECLASS-12.0: 27242608
ECLASS-13.0: 27242608
ETIMETIM 9.0: EC001604
UNSPSCUNSPSC 21.0: 32151600
Descrizione
Axioline F, Bus coupler, EtherNet/IP™, RJ45 jack, transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connector
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Application_note_00110.pdf

Application_note_00140.pdf

Application_note_00048.pdf

Approvals_00785.pdf

Approvals_01195.pdf

Approvals_01199.pdf

Approvals_01203.pdf

Approvals_01209.pdf

Approvals_01294.pdf

Approvals_01303.pdf

Approvals_01328.pdf

Approvals_01329.pdf

Approvals_01756.pdf

Approvals_01803.pdf

Approvals_01836.pdf

Approvals_01893.pdf

Data_sheet_03161.pdf

Manual_00006.pdf

Manual_00081.pdf

Manual_00007.pdf

Manual_00039.pdf

Manufacturer_declaration_00820.pdf

Manufacturer_declaration_01712.pdf

Manufacturer_declaration_05480.pdf

Manufacturer_declaration_05562.pdf

Manufacturer_declaration_05563.pdf

Package_slip_00690.pdf

Product_information_00033.pdf

Product_information_00244.pdf

Quick_start_guide_00004.pdf

Quick_start_guide_00006.pdf

Technical_drawing_37507.pdf

Various_00004.pdf