Non disponibile 
| Dimensions | Width: 128 mm Height: 110 mm Depth: 69 mm |
| Material specifications | Color: gray aluminum Housing material: Metal |
| Interfaces | Ethernet (combo) Connection method: SFP/RJ45 Note on the connection method: Either SFP port or RJ45 port active Transmission speed: 10/100/1000 Mbps (SFP module: 100/1000 Mbps) Transmission physics: Copper or SFP module Transmission length: 100 m (per segment) Signal LEDs: Supply voltage, data transmission, error, link, activity No. of channels: 2 (Combo ports) Serial (RS-232) Connection method: RS-232-C, 6-pos. MINI-DIN socket (PS/2) Fiber optic interface Connection method: SFP Transmission speed: 1000 Mbps (full duplex) Transmission physics: Depending on the SFP module Transmission length: up to 80 km (Depending on the fiber/SFP module used) |
| System properties | Functionality Basic functions: Router with intelligent firewall and Gigabit connectivity and VPN |
| Product properties | Type: Stand-Alone Product type: Security router for the DIN rail Insulation characteristics Protection class: III (IEC 61140, EN61140, VDE0140-1) Security functions 1:1 Network Address Translation (NAT) in the VPN: Supported Number of VPN tunnels: 10 (up to 250 tunnels with additional license as an option) Authentication: X.509v3 certificates with RSA or PSK Data integrity: MD5, SHA-1, SHA256, SHA-512 Dynamic Host Configuration Protocol (DHCP) support: Server or Relay Agent Filtering: MAC and IP addresses, ports, protocols Firewall data throughput: max. 417 Mbps (Router mode, default firewall rules, bidirectional throughput) max. 174 Mbps (Stealth mode, default firewall rules, bidirectional throughput) Firewall rules: Configurable stateful inspection firewall Basic functions: Router with intelligent firewall and Gigabit connectivity and VPN Internet Protocol Security (IPsec) mode: ESP tunnel / ESP transport Link Layer Discovery Protocol (LLDP): As per protocol 802.2 Network Time Protocol (NTP) client: Client Remote Syslog Logging: On externals server Routing: Standard routing, NAT, 1:1-NAT, port forwarding Protection against: IP spoofing, DoS and Syn Flood Protection Encryption methods: DES, 3DES, AES-128, -192, -256 Virtual private network (VPN) throughput: max. 106 Mbps (Router mode, VPN bidirectional throughput) max. 66 Mbps (Stealth mode, VPN bidirectional throughput) |
| Electrical properties | Power consumption: 6.5 W Maximum power dissipation for nominal condition: typ. 6.48 W Test voltage: 500 VDC Test section: for one minute 500 VDC Supply Supply voltage (DC): 24 VDC (redundant) Supply voltage range: 18 VDC ... 32 VDC Power supply connection: Via COMBICON, max. conductor cross section 2.5 mm² Residual ripple: 3.6 VPP (within the permitted voltage range) Max. current consumption: 270 mA Typical current consumption: 270 mA (at US = 24VDC) Function Signal contact control voltage: 24 VDC (typical) Signal contact control current: 270 mA (typical) |
| Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -20°C ... 60°C Ambient temperature (storage/transport): -40°C ... 85°C Permissible humidity (operation): 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport): 5 % ... 95 % (non-condensing) Shock: DINEN60068-2-27 Vibration (operation): in accordance with IEC 60068-2-6: 5g, 10 Hz ... 150 Hz Air pressure (operation): 86 hPa ... 108 kPa (1500m above sea level) Air pressure (storage/transport): 66 hPa ... 108 kPa (3500m above sea level) |
| Standards and regulations | Free from substances that could impair the application of coating: In acc. with VW specification |
| Mounting | Mounting type: DIN rail mounting |
| EMC data | Conformance with EMC directives: IEC 61000-6-2 IEC 61000-4-2 (ESD) 6 kV contact discharge, 8 kV air discharge IEC 61000-6-2 IEC 61000-4-3 (immunity to radiated interference) 10 V/m (80 MHz ... 2000 MHz) IEC 61000-6-2 IEC 61000-4-4 (burst) 2 kV power line, 1kV data line IEC 61000-6-2 IEC 61000-4-5 (surge) power line: 2kV (line/earth), 1kV (line/line), 1kV data line IEC 61000-6-2 IEC 61000-4-6 (immunity to conducted interference) 3 V (10 kHz ... 150 kHz), 10 V (150 kHz ... 80 MHz) Noise immunity: EN 61000-6-2:2005 Electromagnetic compatibility: Conformance with EMC Directive 2014/30/EU Noise emission: EN 61000-6-4 |
| Signaling | Status display: LEDs: LNK, Mode, Inf, ACT, SPD, FD, US1, US2, Fail, and 7-segment display |
| ECLASS | ECLASS-11.0: 19170406 ECLASS-12.0: 19170406 ECLASS-13.0: 19170406 |
| ETIM | ETIM 9.0: EC001478 |
| UNSPSC | UNSPSC 21.0: 43222600 |
Di seguito alcuni articoli correlati a quello che stai vedendo
