2700684 PHOENIX CONTACT - Technology Bsa

Caratteristiche Tecniche

Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/c1416576ed7aaf4e91ee7183ca7f3cde/-S204x204-FJPG Width: 53.6 mm Height: 126.1 mm Depth: 54 mm Note on dimensions: The depth applies when a TH35-7.5 DIN rail is used (in accordance with EN60715).
Interfaces	AxiolineFlocal bus Number of interfaces: 2 Connection method: Bus base module Transmission speed: 100 Mbps
System properties	Module Input address area: 1 Byte Output address area: 0 Byte Required parameter data: 3 Byte Required configuration data: 6 Byte
Input data	Digital Input name: Digital inputs Description of the input: EN 61131-2 type 1 Number of inputs: 8 Connection method: Push-in connection Connection technology: 2-conductor Input voltage: 110 VDC (Nominal voltage) 220 VDC (Nominal voltage) max. 300 VDC Input voltage range: -300 VDC ... 300 VDC Input voltage range "0" signal: -41 VDC ... 41 VDC Input voltage range "1" signal: 88 VDC ... 300 VDC Nominal input voltage U_IN: 110 VDC 220 VDC Nominal input current at U_IN: 1.5 mA Input filter time: < 1 ms Protective circuit: Polarity reversal protection of the inputs
Product properties	Type: block modular Product type: I/O component Product family: AxiolineF Mounting position: any (observe temperature and voltage derating); Nominal mounting position: wall mounting on horizontal DIN rail Scope of delivery: including bus base module and AxiolineF connectors Insulation characteristics Overvoltage category: III (EN 61010-2-201/UL 61010-2-201), up to 2000m above sea level II (EN 61010-2-201/UL 61010-2-201), up to 3000m above sea level Pollution degree: 2
Electrical properties	Potentials: AxiolineF local bus supply (U Supply voltage: 5 VDC (via bus base module) Current draw: max. 120 mA Power consumption: max. 600 mW Electrical isolation/isolation of the voltage ranges Test voltage: I/Os / logic: 4 kV 5 kV Test voltage: I/O/functional ground: 4 kV 5 kV Test voltage: I/O / I/O (adjacent connectors): 2.5 kV Test voltage: Logic/functional ground: 1 kV
Connection data	Connection technology Connection name: AxiolineF connector Note on the connection method: Please observe the information provided on conductor cross sections in the Ã¢AxiolineF: system and installationÃ¢ user manual. Conductor connection Connection method: Push-in connection Conductor cross section rigid: 0.2 mm² ... 1.5 mm² Conductor cross section flexible: 0.2 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Stripping length: 8 mm AxiolineF connector Connection method: Push-in connection Note on the connection method: Please observe the information provided on conductor cross sections in the Ã¢AxiolineF: system and installationÃ¢ user manual. Conductor cross section, rigid: 0.2 mm² ... 1.5 mm² Conductor cross section, flexible: 0.2 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Stripping length: 8 mm
Environmental and real-life conditions	Ambient conditions Ambient temperature (operation): -25°C ... 60°C (Mounting position: wall mounting on horizontal DIN rail, input voltage: max. 264V) -25°C ... 55°C (Mounting position: any) Degree of protection: IP20 Air pressure (operation): 70 kPa ... 106 kPa (up to 3000m above sea level) Air pressure (storage/transport): 70 kPa ... 106 kPa (up to 3000m above sea level) Ambient temperature (storage/transport): -40°C ... 85°C Permissible humidity (operation): 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport): 5 % ... 95 % (non-condensing)
Mounting	Mounting type: DIN rail mounting Mounting position: any (observe temperature and voltage derating); Nominal mounting position: wall mounting on horizontal DIN rail

Specifiche

ECLASS	ECLASS-11.0: 27242604 ECLASS-12.0: 27242604 ECLASS-13.0: 27242604
ETIM	ETIM 9.0: EC001599
UNSPSC	UNSPSC 21.0: 32151600

Descrizione

Axioline F, Digital input module, Digital inputs: 8, 110 V DC / 220 V DC, connection method: 2-wire, corresponds to standard IEC 61850-3, transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connectors

Download

PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Approvals_01328.pdf

Approvals_01329.pdf

Approvals_01758.pdf

Data_sheet_03230.pdf

Manual_00006.pdf

Manual_00007.pdf

Manufacturer_declaration_00805.pdf

Manufacturer_declaration_05480.pdf

Manufacturer_declaration_05562.pdf

Manufacturer_declaration_05563.pdf

Manufacturer_declaration_14500.pdf

Package_slip_00726.pdf

Product_information_00033.pdf

Product_information_00269.pdf

Technical_drawing_37644.pdf

Various_00004.pdf