2700804 PHOENIX CONTACT - Technology Bsa

Caratteristiche Tecniche

Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/61847ea072ac2f4a94bf2299909bd975/-S204x204-FJPG Width: 48.8 mm Height: 119.8 mm Depth: 71.5 mm Note on dimensions: Housing dimensions
Interfaces	Inline local bus No. of channels: 2 Connection method: Inline data jumper Transmission speed: 500 kbps / 2 Mbps
System properties	Module ID code (dec.): 167 ID code (hex): A7 Length code (hex): 04 Length code (dec): 04 Process data channel: 8 Byte Input address area: 8 Byte ((Operating mode: SafetyBridge)) Output address area: 8 Byte ((Operating mode: SafetyBridge)) Register length: 8 Byte Required parameter data: 1 Byte ((Operating mode: SafetyBridge)) Required configuration data: 5 Byte ((Operating mode: SafetyBridge))
Output data	Digital Output name: Digital outputs Output description: +/- switching Connection method: Spring-cage connection Connection technology: 2-, 3-, 4-conductor Number of outputs: 4 (for 2-channel assignment, +/- switching) 4 (for 1-channel assignment, + switching) 4 Protective circuit: Overload protection, short-circuit protection of outputs Output voltage: 24 VDC (U_S - 1 V) Output current: max. 3 A (Total current of all outputs) Maximum output current per channel: 2 A Maximum output current per module: 3 A (See technical data) Nominal output voltage: 24 VDC Behavior with inductive overload: Output can be destroyed
Product properties	Type: modular Product type: I/O component Product family: Inline Application: Functional safety Diagnostics messages: Short-circuit or overload of the digital outputs Error message in diagnostics code (bus) and display by means of the LED on the motor
Electrical properties	Maximum power dissipation for nominal condition: 75 W Transmission medium: Copper Potentials: Communications power (U Supply voltage: 7.5 VDC (see safety data) Current draw: max. 230 mA Potentials: Main circuit supply (U Supply voltage: 24 VDC Supply voltage range: 19.2 VDC ... 30 VDC (including all tolerances, including ripple) Current draw: max. 3.03 A typ. 30 mA (all outputs set including actuator current) Potentials: Segment circuit supply (U Supply voltage: 24 V Supply: Module electronics Supply voltage: 24 VDC (via voltage jumper) Supply voltage range: 19.2 VDC ... 30 VDC Electrical isolation/isolation of the voltage ranges Test voltage: 5 V supply, incoming remote bus/7.5 V supply (bus logics): 500 VAC, 50 Hz, 1 min. Test voltage: 5 V supply, outgoing remote bus/7.5 V supply (bus logics): 500 VAC, 50 Hz, 1 min. Test voltage: 7.5 V supply (bus logics)/24 V supply (I/O): 500 VAC, 50 Hz, 1 min. Test voltage: 24V supply (I/O) / functional ground: 500 VAC, 50 Hz, 1 min.
Connection data	Connection technology Connection name: Inline connector pluggable: yes Conductor connection Connection method: Spring-cage connection Conductor cross section rigid: 0.2 mm² ... 1.5 mm² Conductor cross section flexible: 0.2 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Inline connector Connection method: Spring-cage connection Conductor cross section, rigid: 0.2 mm² ... 1.5 mm² Conductor cross section, flexible: 0.2 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16
Environmental and real-life conditions	Ambient conditions Ambient temperature (operation): -25°C ... 55°C Degree of protection: IP20 Air pressure (operation): 80 kPa ... 108 kPa (up to 2000m above sea level) Air pressure (storage/transport): 66 kPa ... 108 kPa (up to 3500m above sea level) Ambient temperature (storage/transport): -25°C ... 70°C Permissible humidity (operation): 10 % ... 85 % (Take suitable measures against increased air humidity within the permitted temperature range.) Permissible humidity (storage/transport): 10 % ... 85 % (Take suitable measures against increased air humidity within the permitted temperature range.)
Standards and regulations	Protection class: III (IEC 61140, EN61140, VDE0140-1)
Mounting	Mounting type: DIN rail mounting

Specifiche

ECLASS	ECLASS-11.0: 27242604 ECLASS-12.0: 27242604 ECLASS-13.0: 27242604
ETIM	ETIM 9.0: EC001599
UNSPSC	UNSPSC 21.0: 32151600

Descrizione

I/O component, safety-related, digital output module with 4 safe outputs, positive and negative switching; for the SafetyBridge system, PROFIsafe, and INTERBUS Safety; up to SILCL 3, Cat. 4/PL e, SIL 3, plug-in spring-cage connection with discharge plugs

Download

PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Application_note_00111.pdf

Application_note_00226.pdf

Manufacturer_declaration_00963.pdf

Manufacturer_declaration_02135.pdf

Manufacturer_declaration_14509.pdf

Package_slip_01306.pdf

Technical_drawing_37654.pdf

Various_00038.pdf