2702068 PHOENIX CONTACT - Technology Bsa

AXL F DO4/3 AC 1F - Digital module

AxiolineF, Digital output module, Digital outputs:4 (Triac outputs with zero voltage switch), 230 VAC, 2 A, connection technology:3-conductor, transmission speed in the local bus:100 Mbps, degree of protection: IP20, including bus base module and AxiolineF connectors

Cod. Articolo: 2702068

Cod. Fornitore: 2702068

PHOENIX CONTACT

Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/4862d5b0bda14d48a6bb34e9372c151a/-S204x204-FJPG Width: 53.6 mm Height: 126.1 mm Depth: 54 mm Note on dimensions: The depth applies when a TH35-7.5 DIN rail is used (in accordance with EN60715).
Interfaces	AxiolineFlocal bus Number of interfaces: 2 Connection method: Bus base module Transmission speed: 100 Mbps
System properties	Module Input address area: 0 Byte Output address area: 1 Byte Required parameter data: 1 Byte Required configuration data: 6 Byte
Output data	Digital Output name: Digital outputs Connection method: Push-in connection Connection technology: 3-conductor Number of outputs: 4 (Triac outputs with zero voltage switch) Protective circuit: External protection required; I²t-value (a half-wave): 340 A²s Output voltage: 230 VAC Maximum output current per module: 8 A (provide external protection) Nominal output voltage: 230 VAC Output voltage range: 24 VAC ... 230 VAC -20%/+15% (50/60Hz) Load min.: 5.1 kÃ© (at 230V) Output voltage when switched off: see diagram Nominal load, ohmic: max. 460 W (at nominal voltage) Switching frequency: max. 100 per second (with ohmic load) Reverse voltage resistance to short pulses: Reverse voltage proof Behavior with overload: Output may be damaged Signal delay: max. 10 ms (at 50 Hz)
Product properties	Type: block modular Product type: I/O component Product family: AxiolineF Mounting position: any (observe temperature and current derating) Scope of delivery: including bus base module and AxiolineF connectors
Electrical properties	Potentials: AxiolineF local bus supply (U Supply voltage: 5 VDC (via bus base module) Current draw: max. 120 mA Power consumption: max. 600 mW Potentials: Supply for digital output modules (U Supply voltage: 230 VAC Supply voltage range: 12 VAC ... 253 VAC (including all tolerances, including ripple, 50 ... 60 Hz) Current draw: max. 8 A (provide external protection) Power consumption: max. 2024 VA (of which 8VA internal losses) Protective circuit: Surge protection; Varistor 275 V Electrical isolation/isolation of the voltage ranges Test voltage: I/Os / logic: 4 kV 5 kV Test voltage: I/O/functional ground: 4 kV 5 kV Test voltage: I/O area AC / PE: 4 kV
Connection data	Connection technology Connection name: AxiolineF connector Note on the connection method: Please observe the information provided on conductor cross sections in the Ã¢Axioline F: system and installationÃ¢ user manual. When selecting the cables, please note that in the case of a small conductor cross section and high current, the terminal point temperature may be up to 30K above the ambient temperature. Conductor connection Connection method: Push-in connection Conductor cross section rigid: 0.5 mm² ... 1.5 mm² Conductor cross section flexible: 0.5 mm² ... 1.5 mm² Conductor cross section AWG: 20 ... 16 Stripping length: 8 mm AxiolineF connector Connection method: Push-in connection Note on the connection method: Please observe the information provided on conductor cross sections in the Ã¢Axioline F: system and installationÃ¢ user manual. When selecting the cables, please note that in the case of a small conductor cross section and high current, the terminal point temperature may be up to 30K above the ambient temperature. Conductor cross section, rigid: 0.5 mm² ... 1.5 mm² Conductor cross section, flexible: 0.5 mm² ... 1.5 mm² Conductor cross section AWG: 20 ... 16 Stripping length: 8 mm
Environmental and real-life conditions	Ambient conditions Ambient temperature (operation): -25°C ... 60°C (max. 2A/channel for wall mounting on horizontal DIN rail; max. 1A/channel for any mounting position) -25°C ... 50°C (max. 2A/channel for any mounting position) Degree of protection: IP20 Air pressure (operation): 70 kPa ... 106 kPa (up to 3000m above sea level) Air pressure (storage/transport): 70 kPa ... 106 kPa (up to 3000m above sea level) Ambient temperature (storage/transport): -40°C ... 85°C Permissible humidity (operation): 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport): 5 % ... 95 % (non-condensing)
Mounting	Mounting type: DIN rail mounting Mounting position: any (observe temperature and current derating)