Non disponibile 
| Dimensions | Width: 45 mm Height: 130 mm Depth: 120.6 mm |
| Material specifications | Color: silver Housing material: Metal |
| Interfaces | Ethernet Connection method: RJ45 Transmission speed: 10/100 Mbps Transmission physics: Ethernet in RJ45 twisted pair Transmission length: 100 m (per segment) Signal LEDs: Supply voltage, data transmission, error, link, activity No. of channels: 2 (RJ45 ports) Signal contact Connection method: Plug-in/screw connection via COMBICON Additional text: not electrically isolated VPN - release button Connection method: 24 V DC/250 mA can be connected as an option |
| System properties | Functionality Basic functions: Router with intelligent firewall and OPC/Modbus inspector, FW 8.5 or later: VPN for up to 250 tunnels, CIFSIntegrity Monitoring, redundancy function, metal housing, slot for SD memory card, extended temperature range, high-performance firewall / VPN:up to 124 Mbps/40 Mbps System requirements Supported browsers: HTTPS support required |
| Product properties | Type: Stand-Alone Product type: Security router for the DIN rail Insulation characteristics Protection class: III (IEC 61140, EN61140, VDE0140-1) Security functions 1:1 Network Address Translation (NAT) in the VPN: Supported Number of VPN tunnels: 250 (Firmware 8.5 or later) Authentication: X.509v3 certificates with RSA or PSK Data integrity: MD5, SHA-1, SHA256, SHA-512 Dynamic Host Configuration Protocol (DHCP) support: Server or Relay Agent Filtering: MAC and IP addresses, ports, protocols Firewall data throughput: max. 124 Mbps (Router mode, default firewall rules, bidirectional throughput) max. 61 Mbps (Stealth mode, default firewall rules, bidirectional throughput) Firewall rules: Configurable stateful inspection firewall with full scope of functions, deep packet inspection for OPC classic Basic functions: Router with intelligent firewall and OPC/Modbus inspector, FW 8.5 or later: VPN for up to 250 tunnels, CIFSIntegrity Monitoring, redundancy function, metal housing, slot for SD memory card, extended temperature range, high-performance firewall / VPN:up to 124 Mbps/40 Mbps Internet Protocol Security (IPsec) mode: ESP tunnel / ESP transport Link Layer Discovery Protocol (LLDP): As per protocol 802.2 Network Time Protocol (NTP) client: Client Remote Syslog Logging: On externals server Routing: Standard routing, NAT, 1:1-NAT, port forwarding Protection against: IP spoofing, DoS and Syn Flood Protection Encryption methods: DES, 3DES, AES-128, -192, -256 Virtual private network (VPN) throughput: max. 40 Mbps (Router mode, VPN bidirectional throughput) max. 27 Mbps (Stealth mode, VPN bidirectional throughput) |
| Electrical properties | Local diagnostics: P1, P2 Supply voltage US1, US2 Green LED One LED per port Link active Green LED Maximum power dissipation for nominal condition: 2.4 W Supply Supply voltage (DC): 24 VDC (redundant) Supply voltage range: 11 VDC ... 36 VDC Power supply connection: Via COMBICON, max. conductor cross section 2.5 mm² Residual ripple: 3.6 VPP (within the permitted voltage range) Max. current consumption: 0.24 A Typical current consumption: 100 mA (at US = 24VDC) Function Signal contact control voltage: 24 VDC (typical) Signal contact control current: 250 mA (short-circuit-proof) |
| Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -40°C ... 70°C Ambient temperature (storage/transport): -40°C ... 70°C Permissible humidity (operation): 5 % ... 95 % (5% ... 95% relative humidity, temporary condensation in accordance with Class 3K7 / IEC EN 60721-3-3 (except for wind-driven precipitation and ice buildup)) |
| Approvals | Conformity/Approvals Conformance: CE-compliant ATEX: ï II 3G Ex nA IIC T4 Gc IECEx: Ex nA IIC T4 Gc |
| Mounting | Mounting type: DIN rail mounting |
| EMC data | Conformance with EMC directives: IEC 61000-6-2 IEC 61000-4-2 (ESD) 6 kV contact discharge, 8 kV air discharge IEC 61000-6-2 IEC 61000-4-3 (immunity to radiated interference) 10 V/m (80 MHz ... 2000 MHz) IEC 61000-6-2 IEC 61000-4-4 (burst) 2 kV power line, 1kV data line IEC 61000-6-2 IEC 61000-4-5 (surge) power line: 2kV (line/earth), 1kV (line/line), 1kV data line IEC 61000-6-2 IEC 61000-4-6 (immunity to conducted interference) 3 V (10 kHz ... 150 kHz), 10 V (150 kHz ... 80 MHz) Noise immunity: EN 61000-6-2:2005 Electromagnetic compatibility: Conformance with EMC Directive 2014/30/EU Noise emission: EN 55022 / Class B |
| Signaling | Status display: LEDs:P1, P2, Fault, State, Error, LAN, WAN |
| ECLASS | ECLASS-11.0: 19170406 ECLASS-12.0: 19170406 ECLASS-13.0: 19170406 |
| ETIM | ETIM 9.0: EC001478 |
| UNSPSC | UNSPSC 21.0: 43222600 |
Di seguito alcuni articoli correlati a quello che stai vedendo
