2702671 PHOENIX CONTACT - Technology Bsa

AXL F PM EF 1F - Special function module

AxiolineF, power measurement module, input voltage: up to 400VAC (phase/neutral) or 690VAC (phase/phase), input current: up to 5AAC, transmission speed in local bus: 100Mbps, degree of protection: IP20 , including bus base module and AxiolineF connectors

Cod. Articolo: 2702671

Cod. Fornitore: 2702671

PHOENIX CONTACT

Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/80d302c6dd37e74dab200fad48709c28/-S204x204-FJPG Width: 53.6 mm Height: 126.1 mm Depth: 65.5 mm Note on dimensions: The depth applies when a TH35-7.5 DIN rail is used (in accordance with EN60715).
Notes	Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area
Interfaces	AxiolineFlocal bus Number of interfaces: 2 Connection method: Bus base module Transmission speed: 100 Mbps
System properties	Module Input address area: 64 Byte Output address area: 0 Byte Required parameter data: 52 Byte Required configuration data: 7 Byte
Product properties	Type: block modular Product type: I/O component Product family: AxiolineF Mounting position: any (no temperature derating) Operating mode: Process data mode with 32 words Insulation characteristics Pollution degree: 2
Electrical properties	Potentials: AxiolineF local bus supply (U Supply voltage: 5 VDC (via bus base module) Current draw: max. 80 mA typ. 73 mA Power consumption: max. 400 mW typ. 365 mW Electrical isolation/isolation of the voltage ranges Test voltage: 5V supply for local bus (U_Bus) / peripheral range AC: 4 kV, 50 Hz, 1 min. Test voltage: 5V supply of the local bus (U_Bus) / functional ground: 500 VAC, 50 Hz, 1 min.
Connection data	Connection technology Connection name: AxiolineF connector Note on the connection method: Please observe the information provided on conductor cross sections in the Ã¢Axioline F: system and installationÃ¢ user manual. Only use reinforced or double-insulated conductors with a conductor cross section of 1.5mm². AxiolineF connector Connection method: Push-in connection Note on the connection method: Please observe the information provided on conductor cross sections in the Ã¢Axioline F: system and installationÃ¢ user manual. Only use reinforced or double-insulated conductors with a conductor cross section of 1.5mm². Conductor cross section, rigid: 1.5 mm² Conductor cross section, flexible: 1.5 mm² Conductor cross section AWG: 16 Stripping length: 8 mm
Environmental and real-life conditions	Ambient conditions Ambient temperature (operation): -25°C ... 60°C Degree of protection: IP20 Air pressure (operation): 70 kPa ... 106 kPa (Up to 3000m above sea level, from HW01) Air pressure (storage/transport): 70 kPa ... 106 kPa (up to 3000m above sea level) Ambient temperature (storage/transport): -40°C ... 85°C Permissible humidity (operation): 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport): 5 % ... 95 % (non-condensing)
Standards and regulations	Protection class: II
Mounting	Mounting type: DIN rail mounting Mounting position: any (no temperature derating)