Non disponibile 
| Notes | Trade restriction CE note: The products are offered exclusively for export outside the EU and the European Economic Area. |
| Product properties | Type: Stand-Alone Product type: Wireless module Application: Ethernet Insulation characteristics Pollution degree: 2 Wireless card Number: 1 Type: IEEE 802.11 a/b/g/n 2.4ÃGHz and 5ÃGHz to 300 Mbps Assembly instructions: Permanently installed |
| Electrical properties | Maximum power dissipation for nominal condition: 3.6 W Supply: Module electronics Connection technology: COMBICON Connection method: Push-in spring connection Note on the connection method: Recommended conductor cross section: 0.75 mm² Recommended ferrule: connection length 10 mm Recommended crimping pliers: trapezoidal or square Designation: 1128752 FMC 1,5/ 3-ST-3,5-RF GY35BD1-3 Number of positions: 3 Cross section range AWG: 24 ... 16 (Use copper wires rated 75° C (UL)) Supply voltage: 24 VÃDC (SELV) Supply voltage range: 9 VÃDC ... 32 VÃDC (PELV/SELV) Supply current: typ. 150 mA (at 24 V DC) Current consumption: max. 550 mA (at 9 V DC) |
| Connection data | 1128752 FMC 1,5/ 3-ST-3,5-RF GY35BD1-3 Connection method: Push-in spring connection Conductor cross section, rigid: 0.2 mm² ... 1.5 mm² Conductor cross section, flexible: 0.2 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Stripping length: 10 mm |
| Interfaces | Antenna Number: 2 Functions Configuration: Web-based management, automated CLI Quality of service (QoS): Yes Security: 802.11i WPA PSK (preshared key) WPA2 AES TKIP MAC filter Supports 802.1X/RADIUS Wireless licenses: USA, Canada Ethernet (RJ45) Number of interfaces: 1 Connection method: RJ45 Note on the connection method: Auto negotiation and autocrossing Transmission speed: 10/100 Mbps Transmission physics: Copper Transmission length: 100 m (per segment) No. of channels: 1 (RJ45 ports) Wireless Designation: Wireless LAN Antenna connection method: RSMA (female) Frequency band: 2.4 GHz 5 GHz Wireless standard: WLAN IEEE 802.11 a b g n Transmission power: max. 19 dBm (with two antennas) Number of wireless interfaces: 1 IEEE 802. 11 a/b/g/n Wireless modules that can be connected: 10 (In Access Point mode max. 2 SSIDs) |
| Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/9d75b70be04d93409dfca9659338ba01/-S204x204-FJPG Width: 63 mm Height: 26 mm Depth: 113 mm Note on dimensions: Installed dimensions without connector |
| Material specifications | Material base plate: Die-cast zinc, nickel-plated Housing material: Polycarbonate, PC |
| Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): 0°C ... 60°C Air pressure (operation): 800 hPa ... 1080 hPa (up to 2000Ãm above sea level) Air pressure (storage/transport): 660 hPa ... 1080 hPa (up to 3500Ãm above sea level) Ambient temperature (storage/transport): -40°C ... 85°C Permissible humidity (operation): 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport): 5 % ... 95 % (non-condensing) |
| EMC data | Electrostatic discharge Standards/regulations: ENÃ61000-4-2 Electrostatic dischargeââ¬Ã¢¹ Contact discharge: ñ 4 kV Indirect discharge: ñ 6 kV Electromagnetic HF field Standards/regulations: ENÃ61000-4-3 Electromagnetic HF fieldââ¬Ã¢¹ Frequency range: 80 MHz ... 100 MHz 1000 MHz ... 6000 MHz Test field strength: 10 V/m 3 V/m Fast transients (burst) Standards/regulations: ENÃ61000-4-4 Fast transients (burst)ââ¬Ã¢¹ Comments: ñ2.2ÃkV Surge current load (surge) Standards/regulations: ENÃ61000-4-5 Surge current load (surge)ââ¬Ã¢¹ Signal: ñ 0.5 kV (symmetrical) ñ 1 kV (asymmetrical) Conducted interference Standards/regulations: ENÃ61000-4-6 Conducted interferenceââ¬Ã¢¹ Frequency range: 0.15 MHz ... 80 MHz Voltage: 10 V Emitted interference Standards/regulations: ENÃ55022 Test result: ClassÃB |
| Mounting | Mounting type: Wall mounting, optional DIN rail adapter Assembly instructions: Antennas not included in scope of supply |
Di seguito alcuni articoli correlati a quello che stai vedendo
