2832027 PHOENIX CONTACT - Technology Bsa

ST-REL3-KG230/21/SO46 - Relay connectors

Plug-in relay interface for protection against interference on the control side, with soldered-in miniature switching relay, contacts (AgNi): medium to large loads, 1 changeover contact, input voltage 230 V AC

Cod. Articolo: 2832027

Cod. Fornitore: 2832027

PHOENIX CONTACT

Product properties	Product type: Relay Module Mechanical service life: approx. 2x 10⁷ cycles Insulation characteristics Insulation: Basic insulation Insulation characteristicsÃ¢ Insulation: Basic insulation Overvoltage category: III Pollution degree: 2
Electrical properties	Maximum power dissipation for nominal condition: 4.14 W Test voltage (Winding/contact): 2.5 kV AC (50Hz, 1min., winding/contact)
Input data	Coil side Nominal input voltage U_N: 230 VAC Input voltage range: 207 VAC ... 253 VAC (20°C) Drive and function: monostable Drive (polarity): polarized Typical input current at U_N: 18 mA AC Typical response time: 10 ms Typical release time: 8 ms Protective circuit: Bridge rectifier; Bridge rectifier Surge protection; Varistor RC element; RC element Operating voltage display: Yellow LED
Output data	Switching Contact switching type: 1changeover contact Type of switch contact: Single contact Contact material: AgNi Maximum switching voltage: 250 V AC/DC Limiting continuous current: 6 A Maximum inrush current: 8 A Interrupting rating (ohmic load) max.: 95 W (at 24 V DC) 50 W (at 48 V DC) 45 W (at 60 V DC) 35 W (at 110 V DC) 55 W (at 220 V DC) 2000 VA (for 250 V AC)
Dimensions	Width: 20.8 mm Height: 42.5 mm Depth: 112 mm
Environmental and real-life conditions	Ambient conditions Ambient temperature (operation): -20°C ... 50°C Ambient temperature (storage/transport): -20°C ... 70°C
Standards and regulations	Standards/regulations: IEC 60664 EN50178
Mounting	Mounting type: Plug-in mounting Mounting position: any