Automazione Industriale

Meccatronica

Sicurezza Industriale

Componenti Quadri

Sensori e Sistemi di Visione

Pneumatica

Network e Comunicazione

Cavi Speciali

Software di progettazione

Accedi ai servizi

Entra nella tua area riservata

Accedi ai servizi

Entra nella tua area riservata

PHOENIX CONTACT 2861467
PHOENIX CONTACTNon disponibile

IB IL AO 2/U/BP-PAC - Analog module

Inline, Analog output terminal, Analog outputs: 2, 0 V ... 10 V, -10 V ... 10 V, connection technology: 2-conductor, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including Inline connector and labeling field
Cod. Articolo: 2861467
Cod. Fornitore: 2861467
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Caratteristiche Tecniche
Specifiche
Descrizione
Download
Caratteristiche Tecniche
DimensionsDimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/8f49d2b498684640a945b59e148b2698/-S204x204-FJPG
Width: 12.2 mm
Height: 136.8 mm
Depth: 71.5 mm
NotesUtilization restriction
EMC note: EMC: class A product, see manufacturer's declaration in the download area
Utilization restriction​
CCCex note: Use in potentially explosive areas is not permitted in China.
InterfacesInline local bus
Number of interfaces: 2
Connection method: Inline data jumper
Transmission speed: 500 kbps
Transmission physics: Copper
System propertiesModule
ID code (dec.): 91
ID code (hex): 5B
Length code (hex): 02
Length code (dec): 02
Process data channel: 32 bit
Input address area: 4 Byte
Output address area: 4 Byte
Register length: 32 bit
Required parameter data: 6 Byte
Required configuration data: 5 Byte
Output dataAnalog
Output name: Analog outputs
Output description: Single-ended
Connection technology: 2-conductor
Note regarding the connection technology: shielded
Number of outputs: 2
D/A conversion time: < 100 ns
Protective circuit: Transient protection of outputs
Data formats: IB IL, IB ST
Representation of output values: 16 bits (15 bits + sign)
DAC resolution: 13 bit
Process data update: < 1 ms
Voltage output signal: 0 V ... 10 V
-10 V ... 10 V
Load/output load voltage output: > 2 kΩ
Permissible cable length: max. 500 m (The specifications refer to nominal operation after complying with installation instructions. The specifications refer to the following reference cable type: Shielded power station cable: LiYCY; 2 x 2 x 0,5mm²; VDE0812)
Product propertiesType: modular
Product type: I/O component
Product family: Inline
Scope of delivery: including Inline connector and labeling field
Diagnostics messages: Failure of or insufficient communications power UL I/O error message sent to the bus coupler
Electrical propertiesMaximum power dissipation for nominal condition: 1.8 W
Potentials
Power consumption: typ. 0.68 W (No-load)
typ. 0.85 W (Full load (RL = 2kΩ))
Potentials: Communications power (U
Supply voltage: 7.5 VDC (via voltage jumper)
Current draw: max. 40 mA
typ. 33 mA
Potentials: Supply of analog modules (U
Supply voltage: 24 VDC (via voltage jumper)
Supply voltage range: 19.2 VDC ... 30 VDC (including all tolerances, including ripple)
Current draw: max. 35 mA (Full load (RL = 2kΩ))
max. 28 mA (No-load)
typ. 25 mA (Full load (RL = 2kΩ))
typ. 18 mA (No-load)
Electrical isolation/isolation of the voltage ranges
Test voltage: 7.5 V supply (bus logic), 24 V supply UANA / I/O: 500 VAC, 50 Hz, 1 min.
Test voltage: 7.5V supply (bus logic), 24V supply UANA / functional ground: 500 VAC, 50 Hz, 1 min.
Test voltage: 24V supply (I/O) / functional ground: 500 VAC, 50 Hz, 1 min.
Connection dataConnection technology
Connection name: Inline connector
Conductor connection
Connection method: Spring-cage connection
Conductor cross section rigid: 0.08 mm² ... 1.5 mm²
Conductor cross section flexible: 0.08 mm² ... 1.5 mm²
Conductor cross section AWG: 28 ... 16
Stripping length: 8 mm
Inline connector
Connection method: Spring-cage connection
Conductor cross section, rigid: 0.08 mm² ... 1.5 mm²
Conductor cross section, flexible: 0.08 mm² ... 1.5 mm²
Conductor cross section AWG: 28 ... 16
Stripping length: 8 mm
Environmental and real-life conditionsAmbient conditions
Ambient temperature (operation): -25°C ... 55°C
Degree of protection: IP20
Air pressure (operation): 70 kPa ... 106 kPa (up to 3000m above sea level)
Air pressure (storage/transport): 70 kPa ... 106 kPa (up to 3000m above sea level)
Ambient temperature (storage/transport): -25°C ... 85°C
Permissible humidity (operation): 10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport): 10 % ... 95 % (non-condensing)
Standards and regulationsProtection class: III (IEC 61140, EN61140, VDE0140-1)
MountingMounting type: DIN rail mounting
Specifiche
ECLASSECLASS-11.0: 27242601
ECLASS-12.0: 27242601
ECLASS-13.0: 27242601
ETIMETIM 9.0: EC001596
UNSPSCUNSPSC 21.0: 32151600
Descrizione
Inline, Analog output terminal, Analog outputs: 2, 0 V ... 10 V, -10 V ... 10 V, connection method: 2-wire, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including Inline connector and labeling field
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Application_note_00102.pdf

Application_note_00104.pdf

Approvals_00056.pdf

Approvals_00057.pdf

Approvals_00156.pdf

Approvals_01165.pdf

Approvals_01166.pdf

Approvals_01174.pdf

Approvals_01216.pdf

Data_sheet_03517.pdf

Manual_00085.pdf

Manufacturer_declaration_00884.pdf

Manufacturer_declaration_01728.pdf

Manufacturer_declaration_15221.pdf

Package_slip_00193.pdf

Package_slip_01356.pdf

Package_slip_02503.pdf

Product_information_00033.pdf

Product_information_00421.pdf

Technical_drawing_38906.pdf

Various_00038.pdf