Non disponibile 
| Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/8f49d2b498684640a945b59e148b2698/-S204x204-FJPG Width: 24.4 mm Height: 136.8 mm Depth: 71.5 mm |
| Notes | Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area |
| Interfaces | Inline local bus Number of interfaces: 2 Connection method: Inline data jumper Transmission speed: 500 kbps |
| System properties | Module ID code (dec.): 191 ID code (hex): BF Length code (hex): 02 Length code (dec): 02 Process data channel: 32 bit Input address area: 4 Byte Output address area: 4 Byte Register length: 4 Byte Required parameter data: 1 Byte Required configuration data: 5 Byte |
| Output data | Digital Output name: Digital output: 24 V DC Connection technology: 2-conductor (shielded) Number of outputs: 2 Protective circuit: Short-circuit protection, overload protection of the outputs; integrated damping diode for each channel Output voltage: 24 V Maximum output current per module / terminal block: 1 A Nominal output voltage: 24 VDC Nominal load, inductive: 12 VA (1.2H, 24é) Nominal load, lamp: 12 W Nominal load, ohmic: 12 W Maximum operating frequency with ohmic nominal load: 500 Hz Reverse voltage resistance to short pulses: Reverse voltage proof Behavior with overload: Auto restart Behavior at voltage switch-off: The output follows the power supply without delay Overcurrent shut-down: as of 0.7 A Digitalâ Output name: Digital output: 5 V DC Connection technology: 2-conductor (shielded) Number of outputs: 2 Protective circuit: Short-circuit protection, overload protection of the outputs; integrated damping diode for each channel Nominal output voltage: 5 VDC Maximum operating frequency with ohmic nominal load: 50 kHz |
| Product properties | Type: modular Product type: I/O component Product family: Inline Operating mode: PWM, frequency generator, single-shot, pulse/direction signal Process data operation with 2 words Diagnostics messages: Short circuit or overload of a 24 V output yes |
| Electrical properties | Potentials: Communications power (U Supply voltage: 7.5 VDC (via voltage jumper) Current draw: max. 130 mA Power consumption: max. 0.98 W Potentials: Segment circuit supply (U Supply voltage: 24 VDC (via voltage jumper) Current draw: max. 1 A 0 A Electrical isolation/isolation of the voltage ranges Test voltage: 7.5 V supply (bus logics)/24 V supply (I/O): 500 VAC, 50 Hz, 1 min. Test voltage: 7.5 V supply (bus logic) / 5 V supply (I/O): 500 VAC, 50 Hz, 1 min. Test voltage: 24V supply (I/O) / functional ground: 500 VAC, 50 Hz, 1 min. Test voltage: 5V supply (I/O)/functional ground: 500 VAC, 50 Hz, 1 min. |
| Connection data | Connection technology Connection name: Inline connector Conductor connection Connection method: Spring-cage connection Conductor cross section rigid: 0.08 mm² ... 1.5 mm² Conductor cross section flexible: 0.08 mm² ... 1.5 mm² Conductor cross section AWG: 28 ... 16 Stripping length: 8 mm Inline connector Connection method: Spring-cage connection Conductor cross section, rigid: 0.08 mm² ... 1.5 mm² Conductor cross section, flexible: 0.08 mm² ... 1.5 mm² Conductor cross section AWG: 28 ... 16 Stripping length: 8 mm |
| Environmental and real-life conditions | Ambient conditions Ambient temperature (operation): -25°C ... 55°C Degree of protection: IP20 Air pressure (operation): 70 kPa ... 106 kPa (up to 3000m above sea level) Air pressure (storage/transport): 70 kPa ... 106 kPa (up to 3000m above sea level) Ambient temperature (storage/transport): -25°C ... 85°C Permissible humidity (operation): 10 % ... 95 % (non-condensing) Permissible humidity (storage/transport): 10 % ... 95 % (non-condensing) |
| Standards and regulations | Protection class: III (IEC 61140, EN61140, VDE0140-1) |
| Mounting | Mounting type: DIN rail mounting |
| ECLASS | ECLASS-11.0: 27242605 ECLASS-12.0: 27242605 ECLASS-13.0: 27242605 |
| ETIM | ETIM 9.0: EC001601 |
| UNSPSC | UNSPSC 21.0: 32151600 |
Di seguito alcuni articoli correlati a quello che stai vedendo
