2900380 PHOENIX CONTACT - Technology Bsa

Caratteristiche Tecniche

Product properties	Product type: Solid-state relay module Product family: PLC-INTERFACE Application: Railway applications Operating mode: 100% operating factor Insulation characteristics Insulation: Basic insulation Insulation characteristics: Air clearances and creepage distances between the power circuits Insulation: Basic insulation Overvoltage category: III Pollution degree: 2
Electrical properties	Maximum power dissipation for nominal condition: 0.33 W Air clearances and creepage distances between the power circuits Rated insulation voltage: 250 V Rated surge voltage: 4 kV
Input data	Nominal input voltage U_N: 110 VDC Input voltage range in reference to U_N: 0.7 ... 1.25 (t < 1 s = 0.6 ... 1.4 x U_N) Input voltage range: 77 VDC ... 137.5 VDC Switching threshold "0" signal in reference to U_N: Ã¢¤ 0.3 Switching threshold "1" signal in reference to U_N: Ã¢¥ 0.6 Typical input current at U_N: 3 mA Typical response time: 80 µs Typical turn-off time: 600 µs Operating voltage display: Yellow LED Protective circuit: Reverse polarity protection; Polarity protection diode Transmission frequency: 100 Hz
Output data	Contact switching type: 1 N/O contact Design of digital output: electronic Output nominal voltage: 24 VDC Output voltage range: 3 VDC ... 33 VDC (t < 1 s = 1.40 x U_N) Limiting continuous current: 3 A (see derating curve) Surge voltage protection: > 33 VDC Voltage drop at max. limiting continuous current: < 200 mV Output circuit: 2-conductor, floating Protective circuit: Reverse polarity protection; Polarity protection diode Surge protection; Suppressor diode
Connection data	Connection method: Push-in connection Stripping length: 10 mm Conductor cross section rigid: 0.14 mm² ... 2.5 mm² Conductor cross section flexible: 0.14 mm² ... 2.5 mm² 0.2 mm² ... 2.5 mm² (Single ferrule) 2x 0.5 mm² ... 1 mm² (TWIN ferrule) Conductor cross section AWG: 26 ... 14
Dimensions	Width: 6.2 mm Height: 80 mm Depth: 86 mm
Material specifications	Flammability rating according to UL 94: V0 (Housing)
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -25°C ... 70°C Ambient temperature (storage/transport): -40°C ... 85°C
Approvals	Corrosive gas test Identification: ISA-S71.04. G3 Harsh Group EN60068-2-60
Standards and regulations	Air clearances and creepage distances between the power circuits Standards/regulations: IEC 60947-5-1
Mounting	Mounting type: DIN rail mounting Assembly instructions: in rows with zero spacing Mounting position: any

Specifiche

ECLASS	ECLASS-11.0: 27371604 ECLASS-12.0: 27371604 ECLASS-13.0: 27371604
ETIM	ETIM 9.0: EC001504
UNSPSC	UNSPSC 21.0: 39122300

Download

PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Application_note_00006.pdf

Application_note_00146.pdf

Approvals_01560.pdf

Approvals_01561.pdf

Approvals_01883.pdf

Manufacturer_declaration_03452.pdf

Manufacturer_declaration_03453.pdf

Manufacturer_declaration_03607.pdf

Manufacturer_declaration_15553.pdf

Package_slip_01741.pdf

Product_information_00033.pdf

Product_information_00835.pdf

Technical_drawing_39396.pdf