2900391 PHOENIX CONTACT - Technology Bsa

PLC-OPT- 24DC/110DC/3RW - Solid-state relay module

PLC-INTERFACE for railway applications, consisting of basic terminal block with push-in connection and integrated miniature solid-state relay, range: 0.7 x U_N to 1.25 x U_N, temperature range: -25°C to +70°C, 1 N/O contact, input: 24 V DC, output: 12 - 140 V DC/3 A

Cod. Articolo: 2900391

Cod. Fornitore: 2900391

PHOENIX CONTACT

Product properties	Product type: Solid-state relay module Product family: PLC-INTERFACE Application: Railway applications Operating mode: 100% operating factor Insulation characteristics Insulation: Basic insulation Insulation characteristics: Air clearances and creepage distances, input/output Insulation: Basic insulation Overvoltage category: III Pollution degree: 2
Electrical properties	Maximum power dissipation for nominal condition: 0.29 W Test voltage (Input/output): 2.5 kV AC (Input/output) Air clearances and creepage distances, input/output Rated insulation voltage: 160 V Rated surge voltage: 4 kV
Input data	Nominal input voltage U_N: 24 VDC Input voltage range in reference to U_N: 0.7 ... 1.25 (t < 1 s = 0.6 ... 1.4 x U_N) Input voltage range: 16.8 VDC ... 30 VDC Switching threshold "0" signal in reference to U_N: < 0.4 Switching threshold "1" signal in reference to U_N: > 0.6 Typical input current at U_N: 12 mA Typical response time: 400 µs Typical turn-off time: 800 µs Operating voltage display: Yellow LED Protective circuit: Reverse polarity protection; Series polarity protection diode Surge protection Surge voltage protection: > 150 V Transmission frequency: 50 Hz
Output data	Contact switching type: 1 N/O contact Design of digital output: electronic Output nominal voltage: 110 VDC Output voltage range: 12 VDC ... 140 VDC (t < 1 s = 1.40 x U_N) Limiting continuous current: 3 A (see derating curve) Surge voltage protection: > 150 V Voltage drop at max. limiting continuous current: < 150 mV Output circuit: 2-conductor, floating Protective circuit: Reverse polarity protection; Parallel polarity protection diode Surge protection
Connection data	Connection method: Push-in connection Stripping length: 10 mm Conductor cross section rigid: 0.14 mm² ... 2.5 mm² Conductor cross section flexible: 0.14 mm² ... 2.5 mm² 0.2 mm² ... 2.5 mm² (Single ferrule) 2x 0.5 mm² ... 1 mm² (TWIN ferrule) Conductor cross section AWG: 26 ... 14
Dimensions	Width: 6.2 mm Height: 80 mm Depth: 86 mm
Material specifications	Flammability rating according to UL 94: V0 (Housing)
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -25°C ... 70°C Ambient temperature (storage/transport): -40°C ... 85°C
Approvals	CE Certificate: CE-compliant UKCA Certificate: UKCA-compliant Corrosive gas test Identification: ISA-S71.04. G3 Harsh Group EN60068-2-60 Shipbuilding approval Certificate: TAE0000196 DNV GL data Temperature: D Humidity: A Vibration: B EMC: B Enclosure: Required protection according to the Rules shall be provided upon installation on board
EMC data	Low Voltage Directive: Conformance with Low Voltage Directive Electromagnetic compatibility: Conformance with EMC directive
Standards and regulations	Air clearances and creepage distances, input/output Standards/regulations: IEC 60947-5-1 Railway standard Standards/regulations: DINEN50155 (in relevant parts) DNVGL-CG-0339
Mounting	Mounting type: DIN rail mounting Assembly instructions: in rows with zero spacing Mounting position: any