Non disponibile 
| Product properties | Product type: Single relay Operating mode: 100% operating factor Mechanical service life: approx. 5x 107 cycles Insulation characteristics Overvoltage category: II Pollution degree: 2 |
| Electrical properties | Maximum power dissipation for nominal condition: 0.91 W Test voltage (Winding/contact): 2 kV AC (50Hz, 1min., winding/contact) Test voltage (Changeover contact/changeover contact): 2 kV AC (50Hz, 1min., changeover contact/changeover contact) |
| Input data | Coil side Nominal input voltage UN: 24 VDC Input voltage range: 18.7 VDC ... 36 VDC Input voltage range in reference to UN: see diagram Drive and function: monostable Drive (polarity): non-polarized Typical input current at UN: 38 mA Typical response time: 13 ms Typical release time: 8 ms Coil resistance: 630 é ±15% |
| Output data | Switching Contact switching type: 4 changeover contacts Type of switch contact: Single contact Contact material: AgNi, hard gold-plated Maximum switching voltage: 250 VAC 125 VDC Minimum switching voltage: 1 V Limiting continuous current: 5 A Maximum inrush current: 12 A (15 ms) Min. switching current: 1 mA Interrupting rating (ohmic load) max.: see diagram 1250 VA (for 250 V AC) |
| Environmental and real-life conditions | Ambient conditions Ambient temperature (operation): -55°C ... 70°C Ambient temperature (storage/transport): -55°C ... 70°C |
| Standards and regulations | Standards/regulations: IEC 60664 IEC 60664A DINVDE0110 |
| ECLASS | ECLASS-11.0: 27371601 ECLASS-12.0: 27371601 ECLASS-13.0: 27371601 |
| ETIM | ETIM 8.0: EC001437 |
| UNSPSC | UNSPSC 21.0: 39122300 |
Di seguito alcuni articoli correlati a quello che stai vedendo
