2982760 PHOENIX CONTACT - Technology Bsa

Caratteristiche Tecniche

Product properties	Product type: Solid-state relay module Product family: PLC-INTERFACE Application: Output function Operating mode: 100% operating factor Insulation characteristics Insulation: Basic insulation Insulation characteristics: Air clearances and creepage distances between the power circuits Insulation: Basic insulation Overvoltage category: III Pollution degree: 2
Electrical properties	Maximum power dissipation for nominal condition: 0.22 W Test voltage (Input/output): 2.5 kV_rms (50Hz, 1min.) Air clearances and creepage distances between the power circuits Rated insulation voltage: 250 VAC Rated surge voltage: 4 kV
Input data	Rated actuating voltage U_C: 24 VDC Voltage range with reference to U_C: 0.8 ... 1.2 Rated actuating current I_C: 9 mA Switching threshold "0" signal in reference to U_N: Ã¢¤ 0.4 Switching threshold "1" signal in reference to U_N: Ã¢¥ 0.8 Typical response time: 10 ms Typical turn-off time: 10 ms Operating voltage display: Yellow LED Protective circuit: Reverse polarity protection; Polarity protection diode Freewheeling diode; Freewheeling diode Transmission frequency: 10 Hz
Output data	Contact switching type: 1 N/O contact Design of digital output: electronic Output voltage range: 24 VAC ... 253 VAC Limiting continuous current: 2 A (see derating curve) Min. load current: 25 mA Leakage current: 1 mA Surge current: 30 A (tp = 10ms) Phase angle cos phi min: 0.5 Max. load value: 4 A²s (tp = 10ms, at 25°C) Peak offstate voltage: 600 V Voltage drop at max. limiting continuous current: 1 V Output circuit: 2-conductor floating, zero voltage switch Protective circuit: RC element
Connection data	Connection method: Screw connection Stripping length: 8 mm Screw thread: M3 Conductor cross section rigid: 0.14 mm² ... 2.5 mm² Conductor cross section flexible: 0.14 mm² ... 2.5 mm² 0.2 mm² ... 2.5 mm² (Single ferrule) 2x 0.5 mm² ... 1.5 mm² (TWIN ferrule) Conductor cross section AWG: 26 ... 14 Tightening torque: 0.6 Nm ... 0.8 Nm
Dimensions	Width: 14 mm Height: 80 mm Depth: 94 mm
Material specifications	Flammability rating according to UL 94: V0 (Housing)
Environmental and real-life conditions	Ambient conditions Degree of protection (Relay): IP20 Degree of protection (Installation location): Ã¢¤ IP54 Ambient temperature (operation): -20°C ... 60°C Ambient temperature (storage/transport): -25°C ... 85°C Altitude: Ã¢¤ 2000 m
Approvals	CE Certificate: CE-compliant UKCA Certificate: UKCA-compliant Shipbuilding approval Certificate: TAE0000196 Corrosive gas test Identification: ISA-S71.04. G3 Harsh Group EN60068-2-60 DNV GL data Temperature: D Humidity: A Vibration: B/C EMC: B Enclosure: Required protection according to the Rules shall be provided upon installation on board
EMC data	Low Voltage Directive: Conformance with Low Voltage Directive Electromagnetic compatibility: Conformance with EMC directive
Standards and regulations	Air clearances and creepage distances between the power circuits Standards/regulations: IEC 60947-5-1
Mounting	Mounting type: DIN rail mounting Assembly instructions: in rows with zero spacing

Specifiche

ECLASS	ECLASS-11.0: 27371604 ECLASS-12.0: 27371604 ECLASS-13.0: 27371604
ETIM	ETIM 9.0: EC001504
UNSPSC	UNSPSC 21.0: 39122300

Descrizione

PLC-INTERFACE for output functions, consisting of PLC-BSC.../ACT basic terminal block with screw connection and plug-in miniature solid-state relay, for mounting on DIN rail NS 35/7,5, 1 N/O contact, input: 24 V DC, output: 24 - 253 V AC/2 A

Download

PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Application_note_00006.pdf

Application_note_00148.pdf

Approvals_00240.pdf

Approvals_01560.pdf

Approvals_01561.pdf

Approvals_01883.pdf

Manufacturer_declaration_04305.pdf

Manufacturer_declaration_04306.pdf

Manufacturer_declaration_04307.pdf

Manufacturer_declaration_17055.pdf

Package_slip_01742.pdf

Product_information_00033.pdf

Product_information_00131.pdf

Product_information_00843.pdf

Technical_drawing_41702.pdf